Remote Control Actuators
Solutions for Complex Control Situations
For over 20 years, Remote Control Actuators have responded to complex control situations with solutions to match your valve and process requirements. Remote Control, Inc., the US Subsidary of Remote Control Sweden AB, an ISO 9001 company, along with German and UK divisions, specializes in engineering actuator systems for companies around the world.
Since 1988 Remote Control US has responded with solutions to match your valve and process requirements. Timely quoting and reliable deliveries, combined with consistently providing the right solution, means you can confidently select Remote Control as your actuator and accessory supplier.
Remote Control Electric Actuators
Description:
Remote Control RCEL Series Electric Actuators are engineered to provide efficient, high performance automation of quarter turn valves. The RCEL Series has improved reliability incorporating all the best features. The maximum torque output range is 521 inch lbs. to 21,700 inch lbs. The RCEL actuators are CSA C/US approved in 120VAC models. The RCEL actuators have a number of options. For more information on the RCEL electric actuator refer to the RCEL datasheet in the product section of our website.
Features:
- Standard enclosure IP-67, NEMA 4, 4X.
- Squirrel cage, totally enclosed motor
- Standardized and color-coded wiring
- Manual override hand/auto declutch lever, automatic reset when motor is energized
- Handwheel designed for safe, efficient operation
- Mounting standardized to ISO-5211; removable drive bushing can be machined to match valve stem
- Wormgear drive for longer life and low maximum noise level of 50dB
- Indicator top mounted for continuous visual indication of valve position
- 20 watt internal heater to minimize condensation due to temperature and humidity changes
- Cam actuated, end of travel limit switches are easily adjusted to de-energize actuator for precise valve position
- Torque switch is cam actuated and factory set to provide over torque protection for valves, available in size RCEL-15 thru RCEL-250
- Mechanical limit stops designed to prevent over-travel of quarter turn applications
- Valve backdrive is prevented by a rolled steel wormgear and aluminum bronze wormwheel
- CSA C/VS Approval on 120 VAC only.
RCEL-Engineering Data:
| TYPE | Max Output Torque Inch Pounds |
Operating Time 60/50 hz 90° |
Duty Cycle 30 min T.P |
Rated Current Amps/ Locked Rotor Amps |
Wt. (lbs) |
|||
| 1-Phase | 3-Phase | |||||||
| 120 vac | 220 vac | 380 vac | 440 vac | |||||
| RCEL-6 | 521 | 14/17 | 100% | 0.66/1.36 | 0.29/0.83 | 0.12/0.33 | 0.14/0.37 | 24 |
| RCEL-9 | 781 | 14/17 | 100% | 1.07/2.10 | 0.49/0.87 | 0.14/0.37 | 0.17/0.41 | 24 |
| RCEL-15 | 1302 | 17/20 | 80% | 1.45/2.14 | 0.71/1.12 | 0.30/0.61 | 0.30/0.65 | 27 |
| RCEL-19 | 1649 | 17/20 | 80% | 1.60/2.97 | 0.90/1.52 | 0.33/0.77 | 0.34/0.83 | 29 |
| RCEL-28 | 2430 | 20/24 | 100% | 1.60/2.97 | 0.90/1.52 | 0.33/0.77 | 0.34/0.83 | 38 |
| RCEL-38 | 3298 | 20/24 | 100% | 1.95/3.75 | 1.26/1.85 | 0.36/0.80 | 0.37/0.87 | 40 |
| RCEL-50 | 4340 | 20/24 | 80% | 3.10/4.90 | 1.50/2.34 | 0.56/1.27 | 0.57/1.36 | 42 |
| RCEL-60 | 5208 | 24/29 | 80% | 3.10/4.90 | 1.50/2.34 | 0.56/1.27 | 0.57/1.36 | 49 |
| RCEL-80 | 6944 | 24/29 | 70% | 4.10/7.50 | 2.15/3.70 | 0.84/1.76 | 0.78/1.88 | 51 |
| RCEL-100 | 8680 | 24/29 | 70% | 4.10/7.50 | 2.15/3.70 | 0.84/1.76 | 0.78/1.88 | 55 |
| RCEL-150 | 13020 | 72/87 | 80% | 3.10/4.90 | 1.50/2.34 | 0.56/1.27 | 0.57/1.36 | 150 |
| RCEL-200 | 17360 | 72/87 | 70% | 4.10/7.50 | 2.15/3.70 | 0.84/1.76 | 0.78/1.88 | 154 |
| RCEL-250 | 21700 | 72/87 | 70% | 4.10/7.50 | 2.15/3.70 | 0.84/1.76 | 0.78/1.88 | 154 |
Main Product Info
Manufacturer: Remote Control
Description:
Remote Control offers a Failsafe Electric Actuator with our RCEL series. We can provide output torques up to 21,700 inch lbs. It will detect primary power failure and respond by positioning the valve into its safe mode. The RCEL Failsafe actuator can be configured to operate single phase 60Hz, 120 or 220VAC models. It can be used in on/off or modulating applications and be provided Nema 4, 4X or explosion proof. The RCEL Failsafe provides low cost protection, automatic position reset, automatically responds to power loss and can be used in remote locations.
New Electronic Failsafe Controller with many standard features:
- Timed or Instant Power Transfer Selection from normal power to UPS or from UPS back to normal power
- Actuator Power Status LED indicates whether the motor is receiving UPS or normal power
- Controller Power Indicator LED provides visual confirmation that power is present
- Remote Test Switch terminal block provides the ability to connect a PLC, Timer or Switch (customer supplied) to test the failsafe and battery whenever required
- Heater / Fan Terminal Block for optional Fan or Heater installation
- Auto-Shutdown when the valve is fully opened or closed after a power failure preventing battery discharge
- Modulating or Non-Modulating valves
- Heavy Duty Transformer Inverter that easily starts motors with very high start-up currents
- Totally Automatic Switch-Mode battery charger
- Supply Current from 0.1 to 16.6 running amp
- Various NEMA Enclosures including explosion proof
- Working Voltage are 120 or 240Vac
With the RCEL Electric Actuator and new Failsafe Battery Backup system Remote Control, Inc. can offer the most reliable, powerful, compact and economical Failsafe system on the market.
Description:
The RCI DHC-100 digital high-resolution controller is for use in the RCEL and RCE series electric actuators. The DHC-100 is a high performance digital positioner intended for use is AC actuators. The DHC-100 can be used with our actuators operating from 2 to 90 second cycle times.
The DHC-100 controller can be configured for various command types (4-20mA, 1-5V, 0-5V, 0-10V, or a digital command) and its fail mode on loss of signal.
With it’s modular design a variety of options are easily plugged in providing other features. A wide range of data is accessible through a digital communications module providing additional control and information. The DHC-100 controller is field interchangable with our existing actuators and controllers.
Features:
- 450 Points of Resolution
- Positon Control of +/- 0.1 degree
- Three Button Control provides easy setup and eliminates the need for additional equipment
- Solid State Construction that can easily be mounted with two screws
- Adaptive Control feature continously adjusts for load and actuator conditions eliminating recalibration
- Polarity Detection feature allows direct or reverse acting operation without rewiring
- Electronic Brake feature can eliminate the need for a mechanical brake or extend exisiting brake life
- Stall Detection feature protects actuator motor from a stall condition
- Automatic Duty Cycle Control feature prevents shutdown of a process due to thermal overload
- Operating Temperature range of 32°F to 140°F
Description:
The Failsafe Electro/Hydraulic Actuator consists of a single acting spring return actuator for fail safe operation, mounted electric motor, hydraulic pump and reservoir. The actuator is modified for hydraulic service which includes a bleeder to purge air from the system. The pump is driven by a totally enclosed fan cooled single phase motor. In the event of a power loss, the valve will automatically go to the fail position (counterclockwise or clockwise) by means of the springs in the actuator.
Features:
-
Springs equal to 100 PSI torque output
-
Limit switch to shut down pump when valve reaches open/closed position
-
Two additional switches for open/close indication
-
Painted carbon steel mounting brackets unless specified otherwise
-
4-20MA positioners in either weather or explosion proof verisions
Options:
- M-1 handwheel manual overrides
- Explosion-proof motors, switches and solenoid valves
- Wash down motors
- Heater and thermostats
- Single phase – 120 VAC, 220 VAC, 3-phase voltages
- 4-20MA DC 0 -10 VDC, or 1-5 VDC for modulation
- 4-20MA DC feedback
- Other voltages available on request
NOTE: We prefer to quote actuator to valve mounting hardware in all cases since the power unit reservoir and actuator are provided as a package.
Technical Data:
Pump: Gear-Type pump, capacity 3.70 gallons/minute M404 Model. Opening and closing stroke times at +70°F ambient temperature.
RCI 230SRH-100/M404 ……………………….3-5 seconds
RCI 240SRH-100/M404 ……………………….5-10 seconds
RCI 250SRH-100/M404 ………………………10-15 seconds
RCI 260SRH-100/M404 ………………………15-20 seconds
RCI 265RH100/M404………………………….25-30 seconds
RCI 270SRH-100/M404 ………………………35-50 seconds
RCI 280SRH-100/M404 ………………………75-100 seconds
RCI 88SRH-100/M404 ……………………… 250-300 seconds
RCI 90SRH-100/M404 ………………………. 150-200 seconds
RCI 100SRH-100/M404 ……………………….250-300 seconds
NOTE: Failure and power stroke times can be altered through variations of the standard package.
Pump Pressure – Factory set between 100 and 140 PSI
Motor – 1/2 HP, 3450 RPM, 115/230/60, single phase
Operating Temperature Range – -5°F to 130°F
Oil Type – Mobil DTE 24 or equivalent
Torque Output:
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Description:
The RCE Series includes both Failsafe Electric Actuators as well as options with Engineered Resin Housing features. Torques range from 150 to 2000 in. lbs. to meet a multitude of needs.
Features:
(DISCONTINUED – Contact Us for Replacement Options)
- Reversing type motor
-
Brushless, capacitor-run motors (AC models)
-
Integral thermal overload protection with auto-reset (AC models)
-
ISO bolt circle
-
Two 1/2″ NPT conduit ports prevent interference between control and power signals
-
Visual position indicator (beacon); valve positionvisible from a distance
-
Declutchable manual override easily employed by pulling up on indicator knob and inserting wrench onto flats of stem
-
Standard travel-stop limit switches can simultaneously be used for light indication
-
Meets Enclosure Ratings for NEMA 4X, 7 AND 9
Options:
- Limit Switches – Two additional limit switches may be mounted in the RCE for safely interlocking other equipment, such as pumps, compressors, mixers, or other valves
-
Feedback Potentiometer: When control operation or position feedback information is needed, a 1000 ohm, 1 watt potentiometer with 5% linearity may be installed
-
Heater and Thermostat: For operation at low temperature (to -40° F). Also used to combat condensation in in high humidity areas
-
Milliamp Positioner: An all solid state electronic positioner can be installed in the housing of the RCE, 75% duty cycle actuator. Standard 4-20 milliampere input signal, or optional 10-50 ma, or 0-10 VDC.
-
Voltages: 12, 24, 220 VAC; 12, and 24 VDC
-
Center Off Operation: Allows for 3 position control of 3-way valves4-20 mA positioner
-
Failsafe battery pack
-
Mechanical brake for butterfly valves
-
Other options available
Specifications:
Model: 40, 70, 110, 200
Torque: 400-2000 in-lbs.
Voltage: 120 VAC, 50/60 Hz
Amp Draw: 40-10-4, 70-10-4: 1.3 amps
110-25-4, 200-25-4: 1.0 amp
Conduit Entry: 1/2″ NPT
Max.Ambient Temp: 150ºF
Switches: 2 Single pole, double throw (15 amp rating)
Cycle time 90°: 40-10-4, 70-10-4: 10 seconds
110-25-4, 200-25-4: 25 seconds
| Actuator Model | Torque (in. lbs.) | Voltages | Duty Cycle | Cycle Time (90 sec) | Amp Draw | Weight(lbs) |
| RCE 40-10-4 | 400 | 115 VAC | 100% | 10.0 | .5 | 10 |
| RCE 40-10-4 | 400 | 220 VAC | 75% | 10.0 | .4 | 10 |
| RCE 40-10-4 | 400 | 12VDC | 75% | 10.0 | 2.0 | 10 |
| RCE 40-10-4 | 400 | 24VDC | 75% | 10.0 | 4.0 | 10 |
| RCE 40-10-4 | 400 | 12 VAC | 75% | 10.0 | 2.0 | 10 |
| RCE 40-10-4 | 400 | 24 VAC | 75% | 10.0 | 3.0 | 10 |
| RCE 70-10-4 | 700 | 115 VAC | 75% | 10.0 | .8 | 10 |
| RCE 70-10-4 | 700 | 220 VAC | 50% | 10.0 | .6 | 10 |
| RCE 70-10-4 | 700 | 12VDC | 75% | 10.0 | 2.0 | 10 |
| RCE 70-10-4 | 700 | 24VDC | 75% | 10.0 | 4.0 | 10 |
| RCE 70-10-4 | 700 | 12 VAC | 75% | 10.0 | 2.0 | 10 |
| RCE 70-10-4 | 700 | 24 VAC | 75% | 10.0 | 3.0 | 10 |
| RCE 110-25-4 | 1100 | 115 VAC | 100% | 25 | .5 | 11 |
| RCE 110-25-4 | 1100 | 220 VAC | 75% | 25 | .4 | 11 |
| RCE 110-25-4 | 1100 | 12 VDC | 75% | 25 | 2.0 | 11 |
| RCE 110-25-4 | 1100 | 24 VDC | 75% | 25 | 4.0 | 11 |
| RCE 110-25-4 | 1100 | 12 VAC | 75% | 25 | 2.0 | 11 |
| RCE 110-25-4 | 1100 | 24 VAC | 75% | 25 | 3.0 | 11 |
| RCE 200-25-4 | 2000 | 115 VAC | 50% | 25 | 1.0 | 21 |
| RCE 200-25-4 | 2000 | 220 VAC | 50% | 25 | .6 | 21 |
| RCE 200-25-4 | 2000 | 12 VDC | 75% | 25 | 2.0 | 21 |
| RCE 200-25-4 | 2000 | 24 VDC | 75% | 25 | 4.0 | 21 |
| RCE 200-25-4 | 2000 | 12 VAC | • | 25 | • | 21 |
| RCE 200-25-4 | 2000 | 24 VAC | • | 25 | • | 21 |
Description:
Features:
(DISCONTINUED – Contact Us for Replacement Options)
-
Two corrosion resistant models
Series RCE – Baked epoxy-coated aluminum combination
NEMA 4X, 7 and 9 housing
Series RCE – Zytel’ engineered resin NEMA 4X housing -
Wide torque ranges – 150, 300, 400, 700, 1100, 2000 inch-pounds
-
Available voltages – 120, 220, 12 and 24 VAC; 12 and 24 VDC
-
Capable of 25 continuous cycles under full load without recharging batteries
-
Features a built-in trickle charge and automatic battery recharge system
-
Low battery charge indicator light located on outside of housing
-
“Remote-local” switch inside housing facilitates start-up, maintenance
-
Compact design battery pack built into actuator housing
-
Manual override, position indicator, ISO mounting dimensions, and 75% duty cycles are all standard
-
Set for fail-open or fail-close
Options:
-
Heater and thermostat
-
Additional limit switch (RCE 40 and larger)
-
Feedback potentiometer – low voltage only
Specifications:
-
Temperature limits – +15° F to 150° F (heater and thermostat recommended for -40° F to +32° F)
-
Limit switches – SPDT 5 amp (1 Aux LSW Standard)
-
Conduit entry – 1/2″ NPT
-
Lubrication – Gear train is permanently lubricated
-
Maximum battery current charge – 500 mA
Engineering Data:
| Battery Pack
Model |
Torque Duty (in. lbs.) | Cycle 90°(%) | Cycle Time(sec) | Amp Draw(amp) | Weight(lbs) |
| RCE 15 |
150 |
75 | 5.0 | * | 4.0 |
| RCE 30 | 300 | 75 | 5.0 | * | 4.0 |
| RCE 40 | 400 | 75 | 10.0 | * | 10.0 |
| RCE 70 | 700 | 75 | 10.0 | * | 10.0 |
| RCE 110 | 1100 | 75 | 25.0 | * | 11.0 |
| RCE 200 | 2000 | 50 | 25.0 | * | 21.0 |
Features:
(DISCONTINUED – Contact Us for Replacement Options)
-
Reversing type motor
-
Low cost/high quality quater-turn electric actuators
-
Corrosion proof/waterproof NEMA 4X engineered resin housing with stainless steel trim
-
Compact design perfect for installations with space limitations
-
Highly visible position indicator
-
Manual override large handle
-
Auxiliary contacts for light indication
-
ISO bolt circle
Options:
-
Reversing type motor
-
Low cost/high quality quater-turn electric actuators
-
Corrosion proof/waterproof NEMA 4X engineered resin housing with stainless steel trim
-
Compact design perfect for installations with space limitations
-
Highly visible position indicator
-
Manual override large handle
-
Auxiliary contacts for light indication
-
ISO bolt circle
Specifications:
Model:……………………RCE 15, RCE30
Torque:…………………..150-300 in-lbs
Voltage:…………………..120 VAC, 50/60 Hz
Amp Draw:……………….1.3 amps
Conduit Entry:……………1/2″ NPT
Max. Ambient Temp:……150° F
Switches:…………………..2 single pole, double throw (15 amp rating)
Engineering Data:
| Actuator Model | Torque (in. lbs.) | Voltages | Duty Cycle | Cycle Time (90 sec) | Amp Draw | Weight(lbs) |
| RCE 15-5-4 | 150 | 115 VAC | 100% | 5.0 | .5 | 3.5 |
| RCE 30-5-4 | 300 | 115 VAC | 75% | 5.0 | .75 | 3.5 |
| RCE 15-5-4 | 150 | 220 VAC | 75% | 5.0 | 0.8 | 3.5 |
| RCE 30-5-4 | 300 | 220 VAC | 75% | 5.0 | 0.8 | 3.5 |
| RCE 15-5-4 | 150 | 12 VAC | 75% | 5.0 | 2.0 | 3.5 |
| RCE 30-5-4 | 300 | 12 VAC | 75% | 5.0 | 2.0 | 3.5 |
| RCE 15-5-4 | 150 | 24 VAC | 75% | 5.0 | 4.0 | 3.5 |
| RCE 30-5-4 | 300 | 24 VAC | 75% | 5.0 | 4.0 | 3.5 |
| RCE 15-5-4 | 150 | 12 VDC | 75% | 5.0 | 2.0 | 3.5 |
| RCE 30-5-4 | 300 | 12 VDC | 75% | 5.0 | 2.0 | 3.5 |
| RCE 15-5-4 | 150 | 24 VDC | 75% | 5.0 | 4.0 | 3.5 |
| RCE 30-5-4 | 300 | 24 VDC | 75% | 5.0 | 4.0 | 3.5 |
Remote Control Actuators
Description:
The Remote Control RCI 200 Series Pneumatic Actuator features a modern scotch yoke mechanism for high starting and ending torques in a very compact package. Available in both double acting and spring return in 8 sizes with torques to 38,720 in. lbs., it offers great flexibility. The spring return actuator features a spring module with the spring(s) safely contained and epoxy powder coated for maximum corrosion resistance. Our pistons are guided in two places with reinforced TeflonTM bearings which insure positive alignment and long seal life. All RCI 200 Series Actuators carry a 3-year warranty. The RCIO size has adjustable travel stops in both directions.
Technical Data:
- Body – Extruded Aluminum, anodized finish
- Spring Housings,End Caps – Cast Aluminum, anodized finish
- Pistons – Anodized Aluminum
- Drive Shaft – Stainles steel thry RCI 260 size, plated steel in sizes RCI 270, RCI 280
- Seals – Buna N
- Fasteners – Stainles steel thry RCI 260 size, plated steel in sizes RCI 270, RCI 280
- Pressure Rating – RCI 210-240 150 PSI continous / RCIO250-280 116 PSI continous
- Temperature – Range -20°F to +170°F
- Optional Exterior Finishes – Epoxy or Tufram
- Optional Constructions – Low temperature or high temperature seals, low pressure hydraulic service, water hydraulic service, fast opening/closing speed.
- Operating Medium – Compressed air or inert gas
- Mounting Dimensions – ISO 5211 standard
The M1 manual override is an option on the RCI and RCIO sizes 210 through 280 for both DA and SR actuators. Its is lightweight, low mass, simple yet rugged design. It eliminates the need for expensive sandwich type declutchable gear boxes and mounting and leaves the top shaft free for accessories. The M1 may be used as an adjustable stop in either direction at any position. The actuator may be locked in the open or closed position. For technical information on the product click on the datasheet listed below.
The Remote Control RCI 265 Series are an addition to the 200 Series Pneumatic Actuators family. This model also fills the torque gap between the RCI 260 and RCI 270 sizes. It is available in both double acting and spring return, and incorporates all the standard features of the 200 Series. This includes the modern scotch yoke mechanism, compact size and spring modules with epoxy powder coated springs safely cointained plus the 3-year warranty. The pistons are guided in two places with reinforced Teflon bearings which ensure positive alignment and long seal life. An added feature the external adjustable limit stops allow plus or minus 5 degree adjustment in both open and closed positions. An external stop cam can be customized for different rotations.
Technical Data:
Body – Extruded aluminum, Anodized finish
Spring Housings, End Caps – Cast aluminum, chromated and powder coated polyurethane finish
Pistons – Anodized aluminum
Drive Shaft. – Plated steel
Seals – Buna N
Fasterners – Stainless steel
Pressure Rating – 120 PSI continuous
Temperature Range – -20°F to +175°F
Optional Exterior Finishes – Epoxy or tufram
Optional Constructions – Low temperature or high temperature seals, low pressure hydraulic service, water hydraulic service, fast opening/closing speed
Operating Medium – Compressed air or inert gas
Mounting Dimensions – ISO 5211 standard
Weight:
SIZE STANDARD LBS W/ MANUAL OVERIDE LBS
RCI 265-SR 60 66
RCI 265-DA 40 46
The Remote Control RCI 88 Series Pneumatic Actuators features a modern scotch yoke mechanism which allows us to produce an actuator with high starting and ending torques in a very compact package. Available in both spring return and double acting with torques up to 77,435 in. lbs.
Features:
- Low mass high torque design is a real space saver
- Modern scotch yoke design
- Double acting or spring return
- Safe modular spring packs
Options:
- Adjustable travel stops for doubling acting
- Hydraulic manual override
- Positioners, limit switches, solenoid valves
- High or low temperature construction
Technical Data:
-
Maximum Working Pressure 100 PSI
-
Operating Medium Air or Inert Gas
-
Ambient Temperature -22° to + 175°F
- Torque Up to 77,435 lb. In.
Specifications:
| DA | SR | |
| Weight lbs. | 165 | 275 |
| Displacement Clockwise Counterclockwise |
1188 1073 |
1188 1188 |
| Opening/Closing Time at 80 PSI |
15 | 15 |
Materials:
Actuator Body – Extruded aluminum, anodized finish
End Caps,Spring Housings – Cast aluminum, anodized finish
Pistons – Cast aluminum, anodized finish
Drive Shaft – Plated Steel
Seals – Nitrile
Fasteners – Plated steel
The rugged design of this RCI 100 Series will result in a long service life. The iron/aluminum body and modern scotch yoke design cobmines for DIN/ISO dimensional conformance. Double acting or spring return options, safe modular spring packs, and optional manual override are only some of the features available in this series of acutators.
Features:
-
Rugged design for long service life
-
Ductile iron / aluminum body
-
Modern scotch yoke design
-
Double acting or spring return
-
Safe modular spring packs
-
DIN/ISO dimensiona conformance
-
Optional manual override
Options:
-
Adjustable travel stops for double acting
-
Declutchable manual override
-
Positioners, limit switches, solenoid valves
-
Hydraulic oil operation
Technical Data:
-
Maximum Working Pressure – 150 PSI
-
Operating Medium Air or inert gas
-
Ambient Temperature -22°F to +175°F
For application on valves with rotary motion between 0 – 180 degree. The RCR pneumatic actuators consist of a housing in anodized aluminum and two pistons both with one rack. These racks are engaed in the gear which is formed by the middle part of the shaft. When compressed air through bored canals is led to the space between the pistons and each end plate, the air presses the pistons towards the center whereby the shaft is rotated 180 degree. When air is led between the two pistons and vents the outer chambers, the shaft will revert 180 degree.
Technical Data:
Cylinder – Aluminum 4107, Anodized Finish
Piston – Aluminum 4263
Drive Shaft – Steel SIS 1957-04
End Plates – Aluminum 4263
Fasteners – Stainless Steel A4
Seals – Nitrile
Pressure Rating – 150 PSI Continous
Temperature – Range -20º F to + 170º F
The RCI 300Q Series are quarter-turn 316 stainless steel actuators with superior corrosion resistance both internally and externally at a competitive price. That makes the 300Q Series Actuator the optimal choice for extremely corrosive atmospheres, and foodservice, pharmaceutical and chemical plants
Features:
- Torque ranges from 161-17,500 in. lbs.
- Rack and pinion design
- Offset cylinders to eliminate wear causing cantilever loads
- Saddle assembly rack support system reduces friction for long life
- Fully captured springs eliminate spring decompression and allow safe, maintanence-free disassembly
- Travel stop adjustment with pistons that travel outward to close (CW)
- ISO 5211 compliant valve mounting
- NAMUR accessory mounting standard
Technical Data:
|
DESCRIPTION |
STANDARD MATERIAL |
OPTIONAL MATERIAL |
|
Body |
316S |
*** |
|
Cylinders |
316SS |
Lined Fiberglass |
|
Cylinder Seals |
PTFE |
O-Ring Material |
|
Racks |
316SS |
*** |
|
Tie Rods |
316SS |
*** |
|
End Caps |
316SS |
*** |
|
Shaft |
316SS |
*** |
|
Pistons |
316SS |
*** |
|
Springs |
Powder Coat, |
*** |
|
Piston Guides |
RPTFE |
Nylon |
|
Bushings |
RPTFE or Peek |
*** |
|
Bolts |
316SS |
*** |
|
O-Ring |
EPDM |
Buna, Viton Other |
-
ions
-
Anodized cylinders, epoxy coated end caps fastened with stainless steel for corrosion resistance
Materials:
| DESCRIPTION | STANDARD MATERIAL | FINISH |
| Actuator Body | Extruded Aluminum Alloy | Anodized |
| End Cap | Die Cast Aluminum Alloy | Black Epoxy Coated |
| Pinion | Carbon Steel | ENP |
| Piston | Die Cast Alumunim Alloy | Natural |
| Guide | Acetal Resin | Natural |
| “O” Rings | Nitrile | —– |
| Springs | Spring Steel | Epoxy Coated |
| Screws & Nuts | Stainless Steel | Natural |
Specifications:
Pressure Range (Working) – 30 to 142 PSI
Temperature Range – -4º F to +175º F
Stroke – 90º ± 5º
Media – Dry or lubricating air, non-corrosive gas, water or light hydraulic oil
Lubrication – None required, all moving parts are factory lubricated for the cycle life of the actuator.
Construction – Suitable for indoor or outdoor installation
Mounting Dimensions – ISO standard
Remote Control RCI 500 SPS, SPD, SHS & SHD Series steel scotch yoke actuators have been designed to meet the most demanding applications. The classical scotch yoke mechanism has proven to be the most reliable means of high torque transmission, trnasforming the linear movement of the piston into 90 degree rotation which suits ball, butterfly and plug valve applications. Available in both double acting and spring return, with torques exceeding 1 million inch lbs. Available in pneumatic or hydraulic construction
Technical Data:
- Modular construction allowing for complete interchangeability
- Pneumatic or Hydraulic series
- Canted and Symmetric scotch yoke mechanism to suit most valve torque requirements
- End stops allowing adjustment for over travel +/- 5 °
- Housing fabricated from high strength steel
- High strength transversal trust reaction bar
- Polished and internal coated cylinders for maximum corrosion resistance
- Welded spring cartridge ensures personnel safety and simplified assembly
- Manual and hydraulic overrides available for emergency operation
- Standard Temperature Range -4°F to +140°F
- Mounting Flange Dimensions ISO 5211
- Exterior Finish Epoxy Coated Paint
- Operating Medium Compressed air or inert gas
- Optional Constructions:
Low temperature (-49°F) or high temperature (to +340°F), low pressure or high pressure hydraulic service, fast opening/closing speed, electro hydraulic, fire protection, gas over oil actuators
Remote Control Accessories
Actuators are only as good as the engineering behind them. Once the proper actuator is selected for an application, Remote Control assembles a complete solution for shipment. This includes the accessories chosen for proper functioning with your valves. Remote Control has a extensive inventory of limit switches, solenoids, positioners, filter regulators and switching valves.
Description:
Features:
- Low Cost
- Solid and dependable design
- Bolt on visual indicator
- “Quick-Set” cam
- Multi-Point terminal strip
- Dual conduit entries
- Captive cover bolts
- NAMUR standard shaft and mounting
Description:
Features:
- Suitable for switching or lockup functions
- 3 way adjustable (30 – 60 PSI)
- External pilot
- Compact size
- Anodized aluminum bar stock body
- CV = 1.0
- Maximum operating pressure 150 PSI
- Maximum operating temperature 180º F
Specifications:
- Aluminum Anodized Barstock Body
- Honed & Burnished Bore
- Pressure Balanced Spool
- Buna N Seals
- 1/4″ NPT Connection
- 30-60 PSI Adjustable Range
- CV- 1.0
- Single Pilot Spring Return
- Maximum Operating Pressure 150 PSI
- Maximum Operating Temperature 18°F
