Mid-West Instrument
Accessories
Offering the full line of Mid-West accessories for their backflow testing products.
From replacement parts, cleaning kits, adapters, hose assemblies, filters, and carrying cases, we have everything that you need to keep your backflow testing equipment running at optimal performance.
d
d
d
d
- Install the Test Clean into the plugged test cock
- Open test cock and depress plunger to clear the obstruction
- Back out plunger and flush debris into a bucket or floor drain
- Remove the Test Clean and proceed with testing
Designed for hand tight connection of differential pressure test gauges to backflow prevention assemblies. No wrenches or teflon tape required. | Purchase here
- Rotate 360º after installation
- Ideal for tight spaces
- Set includes:
- (3) 90º Swivel Fittings
- (3) 1/4″ NPT Quick Connect 1/4″ Flare
- (3) Spare O-rings
- 15″ x 1/2″ Dia. Tube/Test Cock Adapter Assembly*
- 15″ x 1/2″ Dia. Extension Tube Assembly*
Purchase here | *30″ is Assembled Length
– Five Foot Replacement Hose Assembly Kit for Model 830-5. | Purchase here
- Set of 3 – Red, Yellow, Blue
- 1/4″ 90º hex flare
- 1/4″ Straight Quick Coupler (Both Ends)
- Field Serviceable Filter Housing
- Filters Included
– Five Foot Replacement Hose Assembly Kit for Model 835/845-5. | Purchase here
- Set of 3 – Red, Yellow, Blue
- 1/4″ Straight Quick Coupler (Both Ends)
- Field Serviceable Filter Housing
- Filters Included
b
b
- For test kit hoses that do not have filters
- Set of three 12″ hoses
- 1/4″ quick coupler x 1/4″ flare connection
- Field serviceable filter housing
- Filters included
Note: Adapters shown to illustrate storage usage are not included. | Purchase here
Designed for hand tight connection of differential pressure test gauges to backflow prevention assemblies. Quick connect fittings with ¼” flare make installation fast and easy. Kit comes with three sizes, ¼”, ½”, and ¾” NPT and contains three of each size. Comes in a black clamshell case. | Purchase here
- Designed for hand-tight connection of differential pressure test gauges to backflow prevention assemblies
- No wrenches or teflon tape required
- Set includes all fittings required to test any size backflow device
- 90° Elbow swivel fittings (rotate 360° after installation)
- Ideal for tight spaces
- Set includes:
- (3) 90° Swivel 1/4″ NPT x 1/4″ Flare Quick Connect Fittings
- (3) 1/2″ NPT x 1/4″ FNPT Quick Connect Fittings
- (3) 3/4″ NPT x 1/4″ FNPT Quick Connect Fittings
- (3) Spare O-rings per size
Backflow Test Kits
Specialty Valve is a stocking distributor for all the Mid-West backflow testing products. This includes the 830, 835, 845-2, 845-3, and 845-5 models that add never before seen field flexibility to the backflow testing industry! We also keep a stock of all accessory products to assist the tester and make their life easier. Don’t forget that all Mid-West products come with a 5-year warranty.
b
b
b
b
Purchase here | Standard Specifications:
- Gauge Type: Diaphragm Differential Pressure
- Gauge Dial Size & Range: 41⁄2″ 0-15 P.S.I.D./100 kPa DP Gauge with an 11⁄2″ Line Pressure Gauge
- Differential Pressure Accuracy: ±0.2 P.S.I.D. (Descending)
- Working Pressure: 200 P.S.I.G.
- Body Material: Glass Reinforced Engineering Thermoplastic
- Wetted Internals: EP Elastomers, Brass and 316 S.S. Metal Parts (Nylon Tubing on 830)
- Valves: Soft-Seated Needle with replaceable seats
- Hoses & End Fittings: Nitrile jacket and liner, Schrader 1⁄4″ brass coupler, inline field serviceable filters
- Carrying Case: Durable Molded Plastic
- Hose Length: Three each / 5′ long (color-coded)
- Bleed Tube: One each / 4′ long clear (845-5 and 830 only)
- Filters: Test kit is protected with 90 micron filters to minimize plugging with scale, sand, etc. Elements can be cleaned or replaced.
- Adapter Fittings: Three sets of brass fittings provided for hookup to all standard size test cocks.
- Temperature Limitations: Maximum 150°F/65°C (FREEZING TEMPERATURES MUST BE AVOIDED!)
–Purchase here | Standard Specifications:
- Gauge Type: Diaphragm Differential Pressure
- Gauge Dial Size & Range: 41⁄2″ 0-15 P.S.I.D./100 kPa DP Gauge with an 11⁄2″ Line Pressure Gauge
- Differential Pressure Accuracy: ±0.2 P.S.I.D. (Descending)
- Working Pressure: 200 P.S.I.G.
- Body Material: Glass Reinforced Engineering Thermoplastic
- Wetted Internals: EP Elastomers, Brass and 316 S.S. Metal Parts (Nylon Tubing on 830)
- Valves: Soft-Seated Needle with replaceable seats
- Hoses & End Fittings: Nitrile jacket and liner, Schrader 1⁄4″ brass coupler, inline field serviceable filters
- Carrying Case: Durable Molded Plastic
- Hose Length: Three each / 5′ long (color-coded)
- Bleed Tube: One each / 4′ long clear (845-5 and 830 only)
- Filters: Test kit is protected with 90 micron filters to minimize plugging with scale, sand, etc. Elements can be cleaned or replaced.
- Adapter Fittings: Three sets of brass fittings provided for hookup to all standard size test cocks.
- Temperature Limitations: Maximum 150°F/65°C (FREEZING TEMPERATURES MUST BE AVOIDED!)
Standard Specifications:
- Gauge Type: Diaphragm Differential Pressure
- Gauge Dial Size & Range: 41⁄2″ 0-15 P.S.I.D./100 kPa DP Gauge with an 11⁄2″ Line Pressure Gauge
- Differential Pressure Accuracy: ±0.2 P.S.I.D. (Descending)
- Working Pressure: 200 P.S.I.G.
- Body Material: Glass Reinforced Engineering Thermoplastic
- Wetted Internals: EP Elastomers, Brass and 316 S.S. Metal Parts (Nylon Tubing on 830)
- Valves: Soft-Seated Needle with replaceable seats
- Hoses & End Fittings: Nitrile jacket and liner, Schrader 1⁄4″ brass coupler, inline field serviceable filters
- Carrying Case: Durable Molded Plastic
- Hose Length: Three each / 5′ long (color-coded)
- Bleed Tube: One each / 4′ long clear (845-5 and 830 only)
- Filters: Test kit is protected with 90 micron filters to minimize plugging with scale, sand, etc. Elements can be cleaned or replaced.
- Adapter Fittings: Three sets of brass fittings provided for hookup to all standard size test cocks.
- Temperature Limitations: Maximum 150°F/65°C (FREEZING TEMPERATURES MUST BE AVOIDED!)
–
– Purchase here | Standard Specifications:
- Gauge Type: Diaphragm Differential Pressure
- Gauge Dial Size & Range: 41⁄2″ 0-15 P.S.I.D./100 kPa DP Gauge with an 11⁄2″ Line Pressure Gauge
- Differential Pressure Accuracy: ±0.2 P.S.I.D. (Descending)
- Working Pressure: 200 P.S.I.G.
- Body Material: Glass Reinforced Engineering Thermoplastic
- Wetted Internals: EP Elastomers, Brass and 316 S.S. Metal Parts (Nylon Tubing on 830)
- Valves: Soft-Seated Needle with replaceable seats
- Hoses & End Fittings: Nitrile jacket and liner, Schrader 1⁄4″ brass coupler, inline field serviceable filters
- Carrying Case: Durable Molded Plastic
- Hose Length: Three each / 5′ long (color-coded)
- Bleed Tube: One each / 4′ long clear (845-5 and 830 only)
- Filters: Test kit is protected with 90 micron filters to minimize plugging with scale, sand, etc. Elements can be cleaned or replaced.
- Adapter Fittings: Three sets of brass fittings provided for hookup to all standard size test cocks.
- Temperature Limitations: Maximum 150°F/65°C (FREEZING TEMPERATURES MUST BE AVOIDED!)
–
Purchase here | Standard Specifications:
- Gauge Type: Diaphragm Differential Pressure
- Gauge Dial Size & Range: 41⁄2″ 0-15 P.S.I.D./100 kPa DP Gauge with an 11⁄2″ Line Pressure Gauge
- Differential Pressure Accuracy: ±0.2 P.S.I.D. (Descending)
- Working Pressure: 200 P.S.I.G.
- Body Material: Glass Reinforced Engineering Thermoplastic
- Wetted Internals: EP Elastomers, Brass and 316 S.S. Metal Parts (Nylon Tubing on 830)
- Valves: Soft-Seated Needle with replaceable seats
- Hoses & End Fittings: Nitrile jacket and liner, Schrader 1⁄4″ brass coupler, inline field serviceable filters
- Carrying Case: Durable Molded Plastic
- Hose Length: Three each / 5′ long (color-coded)
- Bleed Tube: One each / 4′ long clear (845-5 and 830 only)
- Filters: Test kit is protected with 90 micron filters to minimize plugging with scale, sand, etc. Elements can be cleaned or replaced.
- Adapter Fittings: Three sets of brass fittings provided for hookup to all standard size test cocks.
- Temperature Limitations: Maximum 150°F/65°C (FREEZING TEMPERATURES MUST BE AVOIDED!)
The Model 830 has been the benchmark of the industry for decades. Constant input from field testers led to refinements such as inline filters, laminated test procedures, removable lids, soft seated needle valves, & line pressure gauges.
The culmination of additional years of development resulted in the Model 845. This model features all the benefits you’ve come to expect from our kits and is available in 5-valve, 3-valve, and 2-valve configurations. The 845 also comes with a spacious carrying case with external fitting/tool compartments.
All Test Kits Have: Soft-seated needle valves with replaceable seats, durable carrying cases, laminated test procedures, line pressure gauges, adapter fittings, and in-line hose filters. In addition, all of our test kits are capable of performing all known test procedures including those recommended by ASSE, AWWA, CSA, FCCC & HR-USC, and NEWWA.
Precision Flow Test Kits
Whether you are looking for a high-accuracy portable test kit for flow indication and leak detection, or a more rugged medium-accuracy test kit, Mid-West has designed and manufactured the right flow test kit for your budget and application.
- Summary: High-accuracy portable test kit for flow indication and leak detection
- Range: 0-10″ H2O thru 0-79.9″ H2O
- Accuracy: Precise (±1% of full scale) accuracy differential pressure gauge
- Popular Applications: (include but are not limited to)
- Measuring the pressure drop across various types of equipment (i.e. filters)
- Balancing HVAC systems
- Checking pump performance
- Orifice plates
- Checking calibration of transmitters
- Reading flow directly (when ordered with a square root dial)
DOWNLOAD MORE INFORMATION- Range: 0-80″ H2O thru 0-600″ H2O
- Accuracy: Precise (±1% of full scale) accuracy differential pressure gauge
- Popular Applications: (include but are not limited to)
- Measuring the pressure drop across various types of equipment (i.e. filters)
- Balancing HVAC systems
- Checking pump performance
- Orifice plates
- Checking calibration of transmitters
- Reading flow directly (when ordered with a square root dial)
- Range: 0-15 PSID thru 0-500 PSID
- Accuracy: Precise (±1% of full scale) accuracy differential pressure gauge
- Popular Applications: (include but are not limited to)
- Measuring the pressure drop across various types of equipment (i.e. filters)
- Balancing HVAC systems
- Checking pump performance
- Orifice plates
- Checking the calibration of transmitters
- Reading flow directly (when ordered with a square root dial)
- Summary: Rugged medium-duty portable flow test kit
- Range: 0-5 PSID thru 0-100 PSID
- Accuracy: Equipped with a ±3-2-3% of full-scale accuracy (ascending) piston type differential pressure gauge
- Popular applications: (include but are not limited to)
- Measuring pressure drop across various types of equipment (i.e. filters)
- Checking pump performance
- Balancing valves
- Leakage
- Range: 0-5″ H2O thru 0-400″ H2O
- Accuracy: Equipped with a ±3-2-3% of full-scale accuracy (ascending) diaphragm type differential pressure gauge. Ideally suited for applications where differential pressures of 0-5” to 0-400” H2O may be encountered.
- Popular Applications:
- Measuring pressure drop across various types of equipment (i.e. filters, balancing valves, averaging pitot tubes, orifice plates, etc.)
- Checking pump performance
- Balancing heating & cooling systems
- Leakage
- Reading differential pressure or flow directly (when ordered with a square root dial)
- Summary: Rugged medium-duty portable flow test kit
- Range: 0-50″ H2O thru 0-100 PSI
- Accuracy: Equipped with a ±3-2-3% of full-scale accuracy (ascending) diaphragm type differential pressure gauge
- Popular Applications: (include but are not limited to)
- Measuring pressure drop across various types of equipment (i.e. filters, balancing valves, averaging pitot tubes, orifice plates, etc.)
- Checking pump performance
- Leakage
- Summary: Rugged two-gauge medium-duty portable flow test kit. Both gauges are protected against over-range to the maximum working pressure of the test kit.
- Range: 0-50″ H2O thru 0-100 PSID
- Accuracy: Equipped with two differential pressure gauges with complimentary dials ranges, enabling it to cover broad range differential pressures and accuracies from ±5% to ± 3-2-3% full scale (ascending)
- Popular Applications: (include but are not limited to)
- Balancing HVAC systems (primary use)
- Measuring pressure drop across filters
- Checking pump performance
- Leakage
- Summary: Rugged two-gauge medium-duty portable flow test kit. Both gauges are protected against over-range to the maximum working pressure of the test kit.
- Range: 0-10″ H2O thru 0-100 PSID
- Accuracy: Equipped with two differential pressure gauges with complimentary dials ranges, enabling it to cover broad range differential pressures and accuracies of ± 3-2-3% full scale (ascending)
- Popular Applications: (include but are not limited to)
- Balancing HVAC systems (primary use)
- Measuring pressure drop across filters
- Checking pump performance
- Leakage
Differential Pressure Gauges & Switches
Mid-West Instrument, located in Sterling Heights, MI is one of the leading designers and manufacturers of differential pressure gauges and switches in the U.S. The firm’s experienced engineers and technicians utilize the latest equipment for engineering, manufacturing, and testing their gauge and switch products.
Product Features:
- Dry Design, No Liquid Fill Required for Over-range Protection
- Glass Reinforced Thermoplastic Gauge Front Is Standard
- Weather Resistant & Corrosion Resistant Gauge Front
- ± 1/2% or ± 1% Full Scale Accuracy
- Six Inch Dial Standard
- 5 Year Warranty
Model 105 Bellows
The Model 105/106 bellows design provides a simple, compact, accurate, direct-acting, low range differential pressure indicator
Common Applications
- Pressurized Tank Level Monitoring
- Stationary Tanks- Horizontal or Vertical
- Tanker Transport
- Flow Indication
- Filter Monitoring for Gases
Product Features
- Over-Range Protection, High over Low and Low over High
- Micro Adjust Pointer
- Wide Selection of DP Ranges & Scales
- Bellows or Multiple Diaphragm Sensing Element
- Working Pressures up to 6000 PSIG (400 bar)
- Gauge Housings available in Aluminum, Brass, Carbon Steel and Stainless Steel 316/316L
- Wide Range of Elastomers
Product Features/Benefits
- Dry Design, No Liquid Fill Required for Over-range Protection
- Glass Reinforced Thermoplastic Gauge Front Is Standard
- Weather Resistant & Corrosion Resistant Gauge Front
- 270º Dial Arc
- Flow Scales Available
- 5-Year Warranty
Specifications
- Differential Pressure Range 0-10″ H2O to 0-79.9″ H2O (or Equivalent) Uni-Directional or Bi-Directional
- Accuracy ±1% F.S. Standard, ± 1/2% F.S. Optional
- Dial Size 6″ (Standard), 4-1/2″ (Optional)
- Working Pressure up to 6000 PSIG (400 bar)
- Material of Construction – Body Aluminum, Brass, Carbon Steel, 316/316L Stainless Steel
- Materials of Construction – Internals Copper Alloy or Stainless Steel
- Switch Options
- 1 or 2 Switches
- SPDT or DPDT Outputs
- 10 AMP @ 30 VDC, 120/240 VAC
- Adjustable from 5 to 95% F.S.
- Electrical Enclosures Weather-proof or Explosion-proof
Special Features
- Over-range Protection Full to Maximum Working Pressure
- Panel Mounting Standard, Front or Panel 6″ or 4-1/2″
- Pipe Mounting Kit Optional, 2″ U-Bolt
- Wall Mounting Optional – Flush Panel or Rear Bracket
- NACE Compliance Optional
The Mid-West Advantage
- 5 Year Warranty
- 30+ Years Hazardous Location product manufacturer.
- OEM capability
- Fast on-time Deliveries
- Friendly Customer Support
- Certified Quality System CSA B51-09 SAI GLOBAL
Overview
The body halves provide the pressure containment function. They also clamp the sensing element and over-pressure assembly between the halves, isolating the high side and low side pressures of the system. The high side body half also provides a mount for the torque tube assembly and the gauge front assembly.
The sensing element is exposed to the differential pressure and deflects in response to the differential pressure. This assembly incorporates a bidirectional relief valve which provides over-pressure protection in both directions. When over-pressured from the high side, the valve is opened by a mechanical stop as the sensing element deflects to its maximum travel. When over-pressured from the low side, the spring-loaded valve opens when the differential pressure exceeds its maximum rating. The opening of the valve in either direction equalizes the pressure and protects the unit.
A range spring is provided to adjust the spring rate of the system to suit the various differential pressure ranges of the instrument.
Operating & Installation Instructions | Locked Logic Installation | Installation Recommendations | Typical Manifold Installation
Model 106 Bellows
Common Applications
- Pressurized Tank Level Monitoring
- Stationary Tanks – Horizontal or Vertical
- Tanker Transport
- Flow Indication
- Filter Monitoring for Gases
Product Features
- Over-Range Protection, High over Low and Low over High
- Micro Adjust Pointer
- Wide Selection of DP Ranges & Scales
- Bellows or Multiple Diaphragm Sensing Element
- Working Pressures up to 6000 PSIG (400 bar)
- Gauge Housings available in Aluminum, Brass, Carbon Steel and Stainless Steel 316/316L
- Wide Range of Elastomers
Product Features/Benefits
- Dry Design, No Liquid Fill Required for Over-range Protection
- Glass Reinforced Thermoplastic Gauge Front Is Standard
- Weather Resistant & Corrosion Resistant Gauge Front
- 270º Dial Arc
- Flow Scales Available
- 5 Year Warranty
Specifications
- Differential Pressure Range 0-80″ H2O to 0-800″ H2O (or Equivalent) Uni-Directional or Bi-Directional
- Accuracy ±1% F.S. Standard, ± 1/2% F.S. Optional
- Dial Size 6″ (Standard), 4-1/2″ (Optional)
- Working Pressure up to 6000 PSIG (400 bar)
- Material of Construction – Body Aluminum, Brass, Carbon Steel, 316/316L Stainless Steel
- Materials of Construction – Internals Copper Alloy or Stainless Steel
- Locked Logic Switch Options (6″ Dial Only)
- 1 or 2 Switches
- SPDT or DPDT Outputs
- 10 AMP @ 30 VDC, 120/240 VAC
- Adjustable from 5 to 95% F.S.
- Snap Acting Switch Options (6″ Dial Only)
- 1 or 2 Switches
- SPDT Outputs
- 4 AMP @ 30 VDC
- 3 AMP @ 240 VAC
- 5 AMP @ 120 VAC
- Adjustable from 3% to 100% F.S.
- Electrical Enclosures Weather-proof or Explosion-proof
Special Features
- Over-range Protection Full to Maximum Working Pressure
- Panel Mounting Standard, Front or Panel 6″ or 4-1/2″
- Pipe Mounting Kit Optional, 2″ U-Bolt
- Wall Mounting Optional – Flush Panel or Rear Bracket
- NACE Compliance Optional
- Seismic Compliance Optional
The Mid-West Advantage
- 5 Year Warranty
- 30 + Years Hazardous Location product manufacturer.
- OEM capability
- Fast on-time Deliveries
- Friendly Customer Support
- Certified Quality SystemCSA B51-09 SAI GLOBAL
Installation & Operation:
Operating & Installation Instructions | Locked Logic Installation | Micro Switch Installation | Installation Recommendations | Typical Manifold Installation
Model 109 Bourdon Tube
Overview
The Model 109 encapsulated Bourdon tube design provides a simple, compact, and accurate differential pressure indicator.
Common Applications
- Pump Performance Testing
- Flow Indication
- Hydraulic Filter Monitoring
- Heat Exchanger Pressure
- Drop Monitoring
Product Features
- Wide DP Range from 0-15 PSID to
- 0-6000 PSID
- Bourdon Tube Sensing Element
- Working Pressures up to 6000 PSIG (400 bar)
- Over-Range Protection, High over Low and Low over High
- Gauge Housings Available in Aluminum, Brass, Carbon Steel and 316/316L Stainless Steel
- Wide Range of Elastomers
Product Features/Benefits
- Dry Design, No Liquid Fill Required for Over-range Protection
- Glass Reinforced Thermoplastic Gauge Front Is Standard
- Weather Resistant & Corrosion Resistant Gauge Front
- 270º Dial Arc
- Flow Scales Available
- 5 Year Warranty
Specifications
- Differential Pressure Range 0-15 PSID to 0-6000 PSID (or Equivalent) Uni-directional or Bi-directional
- Accuracy ±1% F.S. Standard, ± 1/2% F.S. Optional
- Dial Size 6″ (Standard), 4-1/2″ (Optional)
- Working Pressure up to 6000 PSIG (400 bar)
- Material of Construction – Body Aluminum, Brass, Carbon Steel, 316/316L Stainless Steel
- Materials of Construction – Internals Copper Alloy or Stainless Steel
- Switch Options
- 1 or 2 Switches
- SPDT or DPDT Outputs
- 10 AMP @ 30 VDC, 120/240 VAC
- Adjustable from 5 to 95% F.S.
- Electrical Enclosures Weather-proof or Explosion-proof
Special Features
- Over-range Protection – Full to Maximum Working Pressure
- Panel Mounting – Standard, Front or Panel 6″ or 4-1/2″
- Pipe Mounting Kit – Optional, 2″ U-Bolt
- Wall Mounting – Optional – Flush Panel or Rear Bracket
- NACE Compliance – Optional
- Seismic Compliance – Optional
The Mid-West Advantage
- 5 Year Warranty
- 30 + Years Hazardous Location product manufacturer.
- OEM capability
- Fast on-time Deliveries
- Friendly Customer Support
- Certified Quality SystemCSA B51-09 SAI GLOBAL
Detailed Description
The Model 109 is powered by a test quality Bourdon Tube Assembly. The assembly is encapsulated in a high pressure chamber that is fitted with a pressure connection to the inside of the Bourdon Tube and a second connection to the pressure chamber. The Model 109 indicates the difference between the pressure applied inside the Bourdon Tube and the pressure inside the chamber.
The pressure chamber for the assembly is small, close fitting and rugged. The volume displacement of the Bourdon Tube through the pressure range is near to zero (0.02 c.c.). The speed of response of the indicator to changes in differential pressure is instantaneous, even on low volume pressure systems. The low volume displacement is an important advantage for differential pressure leak detection, and when isolation diaphragms are required.
The Bourdon Tube Assembly is protected against over-range in either direction to the rated working pressure by a bi-directional relief valve. The output shaft of the gauge assembly is magnetically coupled through the solid wall of the pressure chamber to a sensitive jeweled pointer shaft in the dial housing outside the chamber. The magnetic coupling transmits the exact motion of the assembly to the pointer to give an accurate dial reading of the differential pressure.
Details & Specifications
Model 109 Bulletin | Electrical Description Bulletin
Installation & Operation
Model 116 Cryogenic
Common Applications:
- Pressurized Tank Level Monitoring
- Stationary Tanks- Horizontal or Vertical
- Tanker Transport
- Cryogenic/Liquefied Gas Applications
- Tank Application Data Sheet
Product Features:
- Drop in replacement for Barton and Prime Measurements
- Over-Range Protection, High over Low and Low over High
- Micro adjust pointer
- DP Ranges from 0-70″ H2O to 0-800″ H2O
- Tamper Proof, All adjustments require removal of bezel for access.
- Snap acting micro switch for alarm (optional)
- In house Oxygen Cleaning (optional)
- Private labeling (optional)
- Black ink on white dial or White ink on back dial
Product Features / Benefits:
- “Engineered Plastic” gauge front and optional stainless steel body bolts provide superior corrosion resistance in “over-the-road” trailers, outdoor or salt air environments
- Dry gauge design with no internal liquid fill
- Eliminates costly clean up from liquid fill leaking and fouling the tank and system
- No gauge damage/accuracy loss caused by liquid fill expansion/contraction when
- Exposed to temperature shocks in cryogenic applications
- Up to a 30 lb. (14 kg) weight savings on liquid Helium and Hydrogen
- Allows more products to be transported in mobile trailers
- Easier and less labor to panel mount
- Adaptable to a wide variety of mounting configurations
- Ability to create custom dials for horizontal and vertical tanks
- Warranty: One Year
Specifications:
- Accuracy: ±1% of Full Scale
- DP Range: 0-70″ H2O to 0-800″ H2O (175 mbar to 2.0 bar)
- Safe Working Pressure: 500 PSIG (Standard) 1000 PSIG (optional)
- Body Material: Brass
- Internals: 316 S.S. Convoluted Bellows
- Port: Dual Top and Bottom, 1/4″ FNPT connections with optional snubbers
- Vilton® Standard, other elastomers available
- 6″ Black Dial with White Lettering (White Dial with Black Lettering)
- Switch Options
- 1 Switch
- SPDT Outputs
- 4 Amp @ 30 VDC
- 3 Amp @ 240 VAC
- 5 Amp @ 120 VAC
- Adjustable from 3% to 100% F.S.
- Operating Temperature -20ºF to +185ºF
- Electrical Enclosures Weather-proof NEMA 4
Proof Pressure:
- Two times working pressure at ambient temperature
Static Pressure:
- 500 PSIG and 1000 PSIG Static Pressure
Temperature Limits:
- -40ºF (-40ºC) to 200ºF (93ºC)
Standards:
Model 116 Series Gauges either conform to and/or are designed to the requirements of the following standards;
- ASME B1.20.1
- ASME B40.100
- NEMA Std. No. 250
- UL Std. No. 50
- CSA-C22.2 No. 14
- SAE J514
The Mid-West Advantage:
- 1 Year Warranty
- 30 + Years Hazardous Location product manufacturer.
- OEM capability
- Fast on-time Deliveries
- Friendly Customer Support
- 3rd Party Certified Quality System
Model 115 & 116 Bulletin | Cryogenic Level Micro Switch | Over-Range Protection
Installation & Operation:
Model 115 Cryogenic
Common Applications:
- Pressurized Tank Level Monitoring
- Stationary Tanks- Horizontal or Vertical
- Tanker Transport
- Cryogenic/Liquefied Gas Applications
Product Features:
- Drop in replacement for Barton and Prime Measurements
- Over-Range Protection, High over Low and Low over High
- Micro adjust pointer
- DP Ranges from 0-10″ H2O to 0-69.9″ H2O
- Tamper Proof, All adjustments require removal of bezel for access.
- Snap acting micro switch for alarm (optional)
- In house Oxygen Cleaning (optional)
- Private labeling (optional)
- Black ink on white dial or white ink on black dial
Product Features / Benefits:
- “Engineered Plastic” gauge front and optional stainless steel body bolts provide superior corrosion resistance in “over-the-road” trailers, outdoor or salt air environments
- Dry gauge design with no internal liquid fill
- Eliminates costly clean up from liquid fill leaking and fouling the tank and system
- No gauge damage/accuracy loss caused by liquid fill expansion/contraction when
- exposed to temperature shocks in cryogenic applications
- Up to a 30lb. (14 kg) weight savings on liquid Helium and Hydrogen
- Allows more products to be transported in mobile trailers
- Easier and less labor to panel mount
- Adaptable to a wide variety of mounting configurations
- Ability to create custom dials for horizontal and vertical tanks
- Warranty: One Year
Specifications:
- Accuracy: ±1% of Full Scale
- DP Range: 0-10″ H2O to 0-69.9″ H2O (25 mbar to 175 mbar)
- Safe Working Pressure: 1500 PSIG
- Body Material: Brass
- Internals: 316 S.S. Welded Multiple Diaphragm
- Port: Dual Top and Bottom, 1/4″ FNPT connections with optional snubbers
- Vilton® Standard, other elastomers available
- 6″ Black Dial with White Lettering (White Dial with Black Lettering)
- Switch Options only available in ranges starting at 80″ H2O
Proof Pressure:
- Two times working pressure at ambient temperature
Static Pressure:
- 500 PSIG and 1000 PSIG Static Pressure
Temperature Limits:
- -40ºF (-40ºC) to 200ºF (93ºC)
Standards:
Model 115 Series Gauges either conform to and/or are designed to the requirements of the following standards;
- ASME B1.20.1
- ASME B40.100
- NEMA Std. No. 250
- UL Std. No. 50
- CSA-C22.2 No. 14
- SAE J514
The Mid-West Advantage:
- 1 Year Warranty
- 30 + Years Hazardous Location product manufacturer.
- OEM capability
- Fast on-time Deliveries
- Friendly Customer Support
- 3rd Party Certified Quality System
Details & Specifications:
Model 115 & 116 Bulletin | Over-Range Protection | Tank Application Data Sheet | Cryogenic Level Micro Switch Information
Installation & Operation:
Operating & Installation Instructions | Switch Operating & Installation Instructions | Installation Recommendations | Typical Manifold Installation
Piston-Type Differential Pressure Gauges are available with one or two hermetically sealed reed switches. The switches are adjustable within a defined percentage of the full scale range of the gauge and are available in SPDT and SPST, normally open or normally closed configurations for various load/power ratings. The switches can be set to activate or deactivate on rising or falling pressure. Switches are “CE” marked per the EU low voltage directive.
Model 120 “Filter Minder”
Common Applications:
- Filter/Strainer Monitoring
- Compressed Air
- Hydraulic
- Refrigerant
- Pump Performance Testing
- Heat Exchanger Pressure Drop Monitoring
Product Features:
- DP Ranges from 0-5 PSID to 0-110 PSID
- Piston Sensing Element
- Working Pressures up to 6000 PSIG (400 bar)
- Over-Range Protection, High over Low and Low over High
- Gauge Housings available in Aluminum, Brass, 316/316L Stainless Steel, Aluminum Bronze and Monel
- Wide Range of Elastomers
Product Features/Benefits:
- Simple Rugged Designs
- Glass Reinforced Thermoplastic Gauge Front Is Standard
- Weather Resistant & Corrosion Resistant Gauge Front
- Shatter Resistant Lens
- 5-Year Warranty
Specifications:
- Differential Pressure Range 0-5 PSID to 0-110 PSID (0-0.35 to 0-7.0 bar)
- Available in a Variety of Equivalent Ranges & Scales
- Accuracy ±2%*
- Operating Temp -40ºF to +200ºF (-40ºC to +93ºC)
- Dial Size 2-1/2″ Round (Standard), 3-1/2″ Round (Optional), 4-1/2″ Round (Optional)
- Working Pressures up to 6000 PSIG
- Material of Construction of Body – Aluminum, 316/316L Stainless Steel, Aluminum Bronze and Monel
- Materials of Construction of Internals – 316 Stainless Steel (Standard) and Monel
- Switch Options
- SPDT 3W, 125 VAC/VDC, 0.25 amps
- SPDT 60W, 240 VAC/VDC, 1.0 amps
- SPST 60W, 240 VAC/VDC, 3.0 amps
- Electrical Enclosures Weather-Resistant, NEMA 4X or NEMA 7
- CE Marked in Accordance With Low Voltage Directive
- Hazardous Locations
- Div I
- Div II
Special Features:
- Over-range Protection Full to Maximum Working Pressure
- Panel Mounting Standard
- Pipe Mounting Kit Optional – 2″ U-Bolt
- Wall Mounting Optional – Rear Mount
- NACE Compliance Optional
- Seismic Compliance Contact Factory
The Mid-West Advantage:
- 5-Year Warranty
- 30 + Years Hazardous Location product manufacturer.
- OEM capability
- Fast on-time Deliveries
- Friendly Customer Support
- Certified Quality System
Details & Specifications:
Model 120 Bulletin
Installation & Operation:
Model 121 “Filter Minder”
Common Applications
- Filter/Strainer Monitoring
- Compressed Air
- Hydraulic
- Refrigerant
- Pump Performance Testing
- Heat Exchanger Pressure Drop Monitoring
Product Features
- DP Ranges from 0-5 PSID to 0-110 PSID (0.35 to 7.0 bar)
- Piston Sensing Element
- Working Pressure up to 6000 PSIG (400 bar)
- Over-Range Protection, High over Low and Low over High
- Gauge Housings available in Aluminum, 316/316L Stainless Steel.
- Wide Range of Elastomers
Product Features/Benefits
- Simple Rugged Designs
- Glass Reinforced Thermoplastic Gauge Front Is Standard
- Weather Resistant & Corrosion Resistant Gauge Front
- Shatter Resistant Lens
- 5 Year Warranty
Specifications:
- Differential Pressure Range 0-5 PSID to 0-110 PSID (0-0.35 to 0-7.0 bar)
- Available in a Variety of Equivalent Ranges & Scales
- Accuracy ±2%*
- Operating Temp -40ºF to +200ºF (-40ºC to +93ºC)
- Dial Size 2-1/2″ Round (Standard), 3-1/2″ Round (Optional), 4-1/2″ Round (Optional)
- Working Pressure 6000 PSIG (400 bar)
- Material of Construction of Body – Aluminum, 316/316L Stainless Steel.
- Materials of Construction of Internals – 316 Stainless Steel (Standard)
- Switch Options
- SPDT 3W, 0.25 Amp, 125 VAC ( 15-95% F.S.) adjustability
- SPST 60W, 3.0 Amp, 240 VAC ( 20-95% F.S.) adjustability
- Electrical Enclosures Weather-Resistant, NEMA 4X, IP65
- Transmitter Options
Special Features:
- Over-range Protection Full to Maximum Working Pressure
- Panel Mounting Standard
- Pipe Mounting Kit Optional – 2″ U-Bolt
- Wall Mounting Optional – Rear Mount
- NACE Compliance Optional
- Seismic Compliance Contact Factory
- Typical Manifold Installation
The Mid-West Advantage:
- 5-Year Warranty
- 30+ Years Hazardous Location product manufacturer.
- OEM capability
- Fast on-time Deliveries
- Friendly Customer Support
- Certified Quality System
Operating & Installation Instructions | Installation Recommendations | Typical Manifold Installation
Model 122 “Filter Minder”
Common Applications
- Filter/Strainer Monitoring
- Compressed Air
- Hydraulic
- Refrigerant
- Pump Performance Testing
- Heat Exchanger Pressure
- Drop Monitoring
Product Features
- DP Ranges from 0-5 PSID to 0-110 PSID
- Piston Sensing Element
- 3000 PSIG Working Pressure (200 bar)
- Over-Range Protection, High over Low and Low over High
- Gauge Housings Aluminum with 316 Stainless Steel Internals
- 2-1/2”, 3-1/2”, or 4-1/2” Round Dial
- Wide Range of Elastomers
Product Features/Benefits
- Simple Rugged Designs
- Glass Reinforced Thermoplastic Gauge Front is Standard
- Weather Resistant & Corrosion Resistant Gauge Front
- Shatter Resistant Lens
- 5 Year Warranty
Specifications:
- Differential Pressure Range 0-5 PSID to 0-110 PSID (0-0.35 to 0-7.0 bar)
- Accuracy ±5% Full Scale
- Working Pressure 3,000 PSIG (200 bar)
- Operating Temp. -40º F to +200º F (-40ºC to +93ºC)
- Body Material: Aluminum
- Internal Materials: 316 Stainless Steel
- Switch Options
- SPDT 3W, 125 VAC/VDC, 0.25 amps
- SPDT 60W, 240 VAC/VDC, 1.0 amps
- SPST 60W, 240 VAC/VDC, 3.0 amps
- CE Marked in accordance with low voltage directive
- Switch Mounting: Clamp On, Stick On Flat Pack
- Process Connections: 1/4″ FNPT End Conn.
- Gauge Design: Magnetically Coupled Piston
- Base Dimensions 3.3H” x 1.97W” x 4.93L”
Special Features:
- Over-range Protection Full to Maximum Working Pressure
- Panel Mounting Standard
- Pipe Mounting Kit Optional – 2″ U-Bolt
- Wall Mounting Optional – Rear Mount
The Mid-West Advantage:
- 5 Year Warranty
- 30 + Years Hazardous Location product manufacturer.
- OEM capability
- Fast on-time Deliveries
- Friendly Customer Support
- Certified Quality System
Details & Specifications:
Model 122 Bulletin
Installation & Operation:
Operating & Installation Instructions | Installation Recommendations | Typical Manifold Installation
Model 123 “Filter Minder”
Common Applications
- Filter/Strainer Monitoring
- Compressed Air
- Hydraulic
- Refrigerant
- Pump Performance Testing
- Heat Exchanger Pressure
- Drop Monitoring
Product Features
- DP Ranges from 0-150 PSID to 0-400 PSID
- Piston Sensing Element
- 5000 PSIG Working Pressure (340 bar)
- Over-Range Protection, High over Low and Low over High
- Material Construction: Aluminum, 316/316L Stainless Steel
- 2-1/2”, 3-1/2” or 4-1/2” dial
- Reverse Pressure Ports Available
Product Features/Benefits
- Simple Rugged Designs
- Glass Reinforced Thermoplastic Gauge Front Is Standard
- Weather Resistant & Corrosion Resistant Gauge Front
- Shatter Resistant Lens
- 5 Year Warranty
Specifications:
- Differential Pressure Range 0-150 PSID to 400 PSID (0-10.3 to 0-27.6 bar)
- Accuracy ±2%*
- Working Pressure 5000 PSIG (340 bar)
- Available in a Variety of Equivalent Ranges & Scales
- Dial Size 2-1/2″ Round (Standard), 4-1/2″ Round (Optional)
- Working Pressure 6000 PSIG
- Material of Construction of Body – Aluminum, 316/316L Stainless Steel, Aluminum, Bronze, Monel
- Materials of Construction of Internals – 316 Stainless Steel (Standard), Monel
- Switch Options
- SPDT 3W, 125 VAC/VDC, 0.25 amps
- SPDT 60W, 240 VAC/VDC, 1.0 amps
- SPST 60W, 240 VAC/VDC, 3.0 amps
- Electrical Enclosures Weather-Resistant, NEMA 4X
- CE Marked in Accordance With Low Voltage Directive
Special Features:
- Over-range Protection Full to Maximum Working Pressure
- Panel Mounting Standard
- Pipe Mounting Kit Optional – 2″ U-Bolt
- Wall Mounting Optional – Rear Mount
- NACE Compliance Optional
The Mid-West Advantage:
- 5 Year Warranty
- 30 + Years Hazardous Location product manufacturer.
- OEM capability
- Fast on-time Deliveries
- Friendly Customer Support
- Certified Quality System
Details & Specifications:
Model 123 Bulletin
Installation & Operation:
Operating & Installation Instructions | Electric Operating & Installation Instructions | Installation Recommendations | Typical Manifold Installation
Model 124
High Working Pressure: 10,000 PSI
Common Applications
- Sub Sea / Deep Well
- High Pressure Filter/Strainer Monitoring
- Compressed Air
- Hydraulic
- Refrigerant
- Pump Performance Testing
- Heat Exchanger Pressure Drop Monitoring
Product Features
- DP Ranges from 0-5 PSID to 0-400 PSID
- Piston Sensing Element
- Working Pressure up to 10,000 PSIG (689 bar)
- Proof Pressure 20,000 PSIG
- Over-Range Protection, High over Low and Low over High
- Gauge Housing 316L Stainless Steel
- Wide Range of Elastomers
Product Features/Benefits
- Simple Rugged Designs
- Glass Reinforced Thermoplastic Gauge Front Is Standard
- Weather Resistant & Corrosion Resistant Gauge Front
- Shatter Resistant Lens
- 1 Year Warranty
Specifications:
- Differential Pressure Range 0-5 PSID to 0-400 PSID (0-0.35 to 0-27.6 bar)
- Available in a Variety of Equivalent Ranges & Scales
- Accuracy ±2%*
- Operating Temp -40ºF to +200ºF (-40ºC to +93ºC)
- Dial Size 2-1/2″ Round (Standard), 3-1/2″ Round (Optional), 4-1/2″ Round (Optional)
- Working Pressure 10,000 PSIG
- Material of Construction of Body – 316/316L Stainless Steel, adjusting Screws & end plugs
- Materials of Construction of Internals – 316 Stainless Steel
- Switch Options
- SPDT 3W, 125 VAC/VDC, 0.25 amps
- SPDT 60W, 240 VAC/VDC, 1.0 amps
- SPST 60W, 240 VAC/VDC, 3.0 amps
- Electrical Enclosures Weather-Resistant, NEMA 4X
- CE Marked in Accordance With Low Voltage Directive
- Transmitter Options
Special Features:
- Over-range Protection Full to Maximum Working Pressure
- Panel Mounting Standard
- Pipe Mounting Kit Optional – 2″ U-Bolt
- Wall Mounting Optional – Rear Mount
- NACE Compliance Optional
The Mid-West Advantage:
- 5 Year Warranty
- 30 + Years Hazardous Location product manufacturer.
- OEM capability
- Fast on-time Deliveries
- Friendly Customer Support
- Certified Quality System
Model 124 Bulletin
Installation & Operation:
Operating & Installation Instructions | Electric Operating & Installation Instructions | Installation Recommendations | Typical Manifold Installation
Standard configuration can be customized and modified to suit a customer’s need for easy installation or retrofit. Differential Pressure is sensed by the movement of an elastomer diaphragm against a precision calibrated range spring. The change in position of the diaphragm in response to the change in Differential Pressure moves an internal magnet. This magnet, in turn, causes a rotary magnet external to the gauge body to rotate. This rotary magnet has a pointer attached which indicates the differential pressure on the dial.
All Mid-West Diaphragm-type Differential Pressure Gauges can be configured for use in hazardous locations.
Model 130 “Delta Gauge”
Common Applications
- Tank Level Monitoring
- Horizontal or Vertical
- Flow Indication/Balancing
- Filter Monitoring for Gases
- Water Treatment Applications
- Vacuum Application
Product Features
- Wide Selection of DP Ranges & Scales
- Elastomer Diaphragm Sensing Element, No Cross Port Leakage
- Up to 500 PSIG Working Pressure (34 bar)
- Over-Range Protection, High over Low and Low over High
- Gauge Housings available in Aluminum, Brass, 316/316L Stainless Steel and Polysulfone Thermoplastic
- Wide Range of elastomers
Product Features/Benefits
- Simple Rugged Designs
- Glass Reinforced Thermoplastic Gauge Front Is Standard
- Weather Resistant & Corrosion Resistant Gauge Front
- 5 Year Warranty
Specifications:
- Differential Pressure Range – 0-5″ H2O to 0-400″ H2O
- Available in a Variety of Equivalent Ranges and/or Flow Scales (square root)
- Accuracy – ±2%* OR ±5% of Full Scale
- Dial Size – 4-1/2″ Round (Standard)
- Working Pressure
- Engineered Thermo Plastic – 300 PSIG (20 bar)
- Metal – 500 PSIG (34 bar)
- Material of Construction – Body: Plastic, Aluminum, Brass 316/316L S.S. or Hastelloy C
- Materials of Construction – Internals: 316 S.S. or Hasteloy C and Elastomer Diaphragm
- Switch Options
- SPDT 3W, 125 VAC/VDC, 0.25 AMPs (metal body only)
- Electrical Enclosures – Weather-resistant, Weather-proof, NEMA 4X and NEMA 7
- Hazardous Location
Special Features:
- Over-range Protection – Full to Maximum Working Pressure
- Panel Mounting – Standard
- Pipe Mounting Kit – Optional – 2″ U-Bolt
- Wall Mounting – Optional – Rear Mount
- NACE Compliance – Optional
The Mid-West Advantage:
- 5 Year Warranty
- 30 + Years Hazardous Location product manufacturer.
- OEM capability
- Fast on-time Deliveries
- Friendly Customer Support
- Certified Quality System
Model 130 BulletinInstallation & Operation:
Operating & Installation Instructions | Electric Operating & Installation Instructions | Installation Recommendations | Typical Manifold Installation
Model 140 Delta Meter ®
Common Applications
- Filter/Strainer Monitoring
- Compressed Air, Hydraulic, Refrigerant
- Pump Performance Testing
- Heat Exchanger Pressure Drop Monitoring
- Water Treatment Applications
- Tank Level Monitoring Horizontal or Vertical
- Flow Monitoring & Balancing
Product Features
- DP Ranges from 0-25 PSID to 0-100 PSID
- Elastomer Diaphragm Sensing Element,
- No Cross Port Leakage
- Up to 3000 PSIG Working Pressure (200 bar)
- Over-Range Protection,
- High over Low and Low over High
- Gauge Housings available in Aluminum, Brass, 316/316L Stainless Steel and Acetal Plastic
- Wide Range of Elastomers
Product Features/Benefits
- Simple Rugged Designs
- Glass Reinforced Thermoplastic Gauge Front Is Standard
- Weather Resistant & Corrosion Resistant Gauge Front
- 5 Year Warranty
Specifications:
- DP Ranges from 0-25 PSID to 0-100 PSID
- Available in a Variety of Equivalent Ranges and/or Flow Scales (Square Root)
- Accuracy ±2%* or ±5% of Full Scale
- Dial Size 2-1/2″ Rd. (Standard)
- 4-1/2″ Rd. (Optional)
- Working Pressure Alum and S.S. – 3000 P.S.I.G. Brass – 1500 PSIG
- Material of Construction – Body: Aluminum, Brass, or 316 Stainless Steel
- Materials of Construction – Internals: 316 Stainless Steel and Elastomer Diaphragm
- Switch Options (Terminal Strip Interface)
- 1 or 2 – SPDT 3W, 125 VAC/VDC, 0.25 amps
- 1 or 2 – SPST (Normally Open) 25W, 240 VAC/VDC, 0.5 amps
- Electrical Enclosures NEMA 4X and NEMA 7
- CE Marked in Accordance With Low Voltage Directive
- Hazardous Locations
- Div I
- Div II
- Transmitter Options
Special Features:
- Over-range Protection Full to Maximum Working Pressure
- Panel Mounting Standard, Front or Rear Panel
- Pipe Mounting Kit Optional – 2″ U-Bolt
- Wall Mounting Optional – Rear Mount
- NACE Compliance Optional
The Mid-West Advantage:
- 5 Year Warranty
- 30 + Years Hazardous Location product manufacturer.
- OEM capability
- Fast on-time Deliveries
- Friendly Customer Support
- Certified Quality System
Model 140 Delta Meter BulletinInstallation & Operation:
Operating & Installation Instructions | Electric Operating & Installation Instructions | Installation Recommendations | Typical Manifold Installation
Model 142 Delta Meter ®
Common Applications
- Filter/Strainer Monitoring
- Compressed Air, Hydraulic, Refrigerant
- Pump Performance Testing
- Heat Exchanger Pressure Drop Monitoring
- Water Treatment Applications
- Tank Level Monitoring Horizontal or Vertical
- Flow Monitoring & Balancing
- Vacuum Application
Product Features
- DP Ranges from 0-20” WC to 0-25 PSID
- Elastomer Diaphragm Sensing Element, No Cross Port Leakage
- Up to 3000 PSIG Working Pressure (200 bar)
- Over-Range Protection, High over Low and Low over High
- Gauge Housings available in Aluminum, Brass, 316/316L Stainless Steel and Acetal Plastic
- Wide Range of Elastomers
Product Features/Benefits
- Simple Rugged Designs
- Glass Reinforced Thermoplastic Gauge Front Is Standard
- Weather Resistant & Corrosion Resistant Gauge Front
- 5 Year Warranty
Specifications:
- Differential Pressure Range 0-20″ H2O to 0-25 PSID
- Available in a Variety of Equivalent Ranges and/or Flow Scales (Square Root)
- Accuracy ±2%* of Full Scale
- Dial Size 2-1/2″ Rd. (Standard)
- 4-1/2″ Rd. (Optional)
- Working Pressure Alum and S.S. – 3000 P.S.I.G. Brass – 1500 PSIG
- Material of Construction – Body Aluminum, Brass, or 316 Stainless Steel
- Materials of Construction – Internals 316 Stainless Steel and Elastomer Diaphragm
- Switch Options (Terminal Strip Interface)
- 1 or 2 – SPDT 3W, 125 VAC/VDC, 0.25 amps
- 1 or 2 – SPST (Normally Open) 25W, 240 VAC/VDC, 0.5 amps
- Electrical Enclosures NEMA 4X and NEMA 7
- CE Marked in Accordance With Low Voltage Directive
- Hazardous Locations
- Transmitter Options
Special Features:
- Over-range Protection Full to Maximum Working Pressure
- Panel Mounting Standard, Front or Rear Panel
- Pipe Mounting Kit Optional – 2″ U-Bolt
- Wall Mounting Optional – Rear Mount
- NACE Compliance Optional
The Mid-West Advantage:
- 5 Year Warranty
- 30 + Years Hazardous Location product manufacturer.
- OEM capability
- Fast on-time Deliveries
- Friendly Customer Support
- Certified Quality System
Model 142 Delta Meter BulletinInstallation & Operation:
Operating & Installation Instructions | Electric Operating & Installation Instructions | Installation Recommendations | Typical Manifold Installation
Model 522
Common Applications
- Filter/Strainer Monitoring
- Compressed Air, Hydraulic, Refrigerant
- Pump Performance Testing
- Heat Exchanger Pressure Drop Monitoring
- Water Treatment Applications
Product Features
- DP Ranges from 0-5 PSD to 0-50 PSID
- Elastomer Diaphragm Sensing Element
- Up to 1000 PSIG Working Pressure (69 bar)
- Maximum DP Pressure: (High to Low) 200 PSID
- Gauge Housings available in Aluminum, 316/316L Stainless Steel and Acetal Plastic
- Buna-N and Viton Elastomers
Product Features/Benefits
Model 522 Differential Pressure Gauge & Switch is a compact, weather resistant gauge for challenging DP Applications and installations. It is suitable for use in outdoor and “Hose Down” applications. The Rolling Diaphragm Sensing Element isolates the high and low side.
- Simple Rugged Designs
- Glass Reinforced Thermoplastic Gauge Front Is Standard
- Weather Resistant & Corrosion Resistant Gauge Front
- 5 Year Warranty
Specifications:
- Differential Pressure Range 0-5 PSID to 0-50 PSID
- Available in Dual Scale PSID/bar and PSID/kPa
- Accuracy ±5% of Full Scale (Acending)
- Dial Size 2-1/2″ Rd. (Standard)
- Working Pressure:
- 1000 PSI (69 bar) for Aluminum & Stainless Steel
- 500 PSI (34.5 bar) for Acetal
- Proof Pressure:
- 2000 PSI (138 bar) for Aluminum & Stainless Steel
- 1000 PSI (69 bar) for Acetal
- Material of Construction – Body Aluminum, 316 Stainless Steel, or Acetal
- Maximum Differential Pressure:
- (Hi to Low) – 200 PSID (13.8 bar)
- Materials of Construction – Internals 316 Stainless Steel and Elastomer Diaphragm
- Switch Option
- DIN 43650/IP65/NEMA 4X Plug-in Connector
- 1 – SPST 60W, 3 amps, 240 VAC/VDC
- CE Marked in Accordance With Low Voltage Directive
Special Features:
- Standard: Panel Mounting, Front or Rear Panel
- Optional: (2) 10-32 Mounting Holes on back of gauge body – 1.75″ Apart x .330″ Depth
The Mid-West Advantage:
- 5 Year Warranty
- 30 + Years Hazardous Location product manufacturer.
- OEM capability
- Fast on-time Deliveries
- Friendly Customer Support
- Certified Quality System
Model 522 BulletinInstallation & Operation:
Operating & Installation Instructions | Installation Recommendations | Typical Manifold Installation
Models 700, 710, 715
Mid-West Instrument Model 700 Wet/Wet Differential Pressure Transmitter utilizes a piezoresistive differential pressure sensor sensing element with stainless steel isolated diaphragm. Silicon oil is filled in between die and two diaphragms. The measured differential pressure is transmitted onto the die through the diaphragm and silicon oil. The signal output generated by the piezoresistive bridge sensor is amplified into a useable voltage or 4-20 mA output as specified by customer. 1 Year Limited Warranty
Common Applications Monitor Differential Pressure Across:
- Filters
- Local Flow Indication
- Factory Pneumatic Air
- Heat Exchangers
- Strainers, Pumps
- Pitot Tubes
- Level Applications
Product Features
- Available Ranges:
- 0-5 PSID (0.35 bar) to 0-300 PSID (0-20.0 bar)
- Use with Liquid or Gas media compatible with material of construction
- Full stainless steel construction, compact size, easy installation
- Laser welded, fully-sealed construction: NEMA 4X (IP65)
- Utilizes Piezoresistive Differential Pressure Sensor Isolated Diaphragm
- Zero Adjust / Potentiometer ±5%
- Span Adjustable / Potentiometer ±5%
- CE Certified to EMI / EMC Directive
- LCD or LED display available upon request
- (Available with DIN Connector & 4-20mA Output only, 2-Wire 20-28 VDC)
- Maximum Overpressure:
- (+) Hi-Side equals 2 times specified DP range
- Maximum Overpressure:
- (-) Low-Side is equal to specified DP range
- Maximum Static Pressure 2,900 PSI
- Operating temperature limits – 14° F to 175° F.
- Storage temperature is -40° F to 200° F
- Sensor is temperature compensated from 32° F to 122° F
- Model 700 is Manufactured in China
It is recommended to install a 3 valve manifold between point of measurement and the transmitter.
Materials Construction
- Pressure Port & Housing: 321 Stainless Steel
- Diaphragm: 316L Stainless Steel
- O-Ring: Viton
- Standard Process Connections: ¼ ” Female BSPP
- (¼” BSPP x ¼” FNPT & ¼” BSPP x ½” FNPT S.S. Adapters Available)
- Fill liquid: Silicon Oil
Available Electrical Specifications:
- Power Supply: 2-Wire 15~28 VDC
- 3-Wire 15~28 VDC
- Output Signals: 2-Wire 4~20mADC,
- 3-Wire, 0~5VDC, 1~5VDC, 0~5VDC
- 0~10VDC, 0-10mADC and 0-20m ADC
- Electrical Connections: Din Plug 43650 or 1.5m 4-pin cable
- Response Time: (10%~90%) <=1ms
- Insulation Resistance 100MΩ, 50VDC
- CE Marked in Accordance With EMC Directive
Model 700 BulletinInstallation & Operation:
Operating & Installation Instructions
Mid-West Instrument has been designing and manufacturing indicating differential pressure switches for use in Hazardous Locations for over 30 years. Their products carry CSA, UL, and or ATEX certifications that apply to the entire assembly as mandated by the applicable Hazardous Locations Standards. In order to mark their product with the CSA & UL marks, Mid-West Instrument is subject to unannounced visits by personnel from each certification lab 4 times per year. In addition, for the ATEX certification, they are subject to a comprehensive audit from a Notified Body representative once every year.
Model 120 – Explosion Proof
Functions and Applications
The Model 120 piston style Differential Pressure Switch is CSA Certified to both the Canadian and U.S. Standards and U.L. Listed to the U.S. Standards. The entire assembly is Certified for use in Class I, Division 1, Groups C, D; Class II, Division 1, Groups E, F, & G Hazardous locations. The entire gauge and the switch is enclosed in a rugged flameproof enclosure. The use of reed switch technology eliminates the need for an additional explosion-proof seal fitting within 18” of the enclosure.
The Entire Assembly is Certified for Hazardous Locations
Specifications:
Certifications: CSA Certified, UL Listed, Class I, Division 1, Groups C, D;
Class II, Division 1, Groups E,F, & G.
Switch Option:
- Set Point Accuracy: 2%*
- Interface: 1/2” Conduit Entry with Color Coded 24”, 18 Awg. Flying Leads
- Enclosure: NEMA 7 (Flame-proof), NEMA 4X optional (In addition to NEMA 7)
- Switch Adjust: External Access to switch adjust internal to enclosure
- Input Power: None. (Switches do not need input power to operate)
Body:
- Working Pressure: 5000 PSIG (345 bar)
- Differential Over-range: 5000 PSID (345 bar)
- Range: 0-5 PSID (0-0.35 bar) to 0-100 PSID (0-7 bar)
- Process Connections: 1/4” MNPT Bottom
- Materials: AL, 316 / 316L SS, Brass
Indicator:
- Accuracy: 2%*
- Dial Size: 2 1/2” (Standard), 3 1/2”, or 4 1/2” None (Switch Only)
- Scales: Uni-directional , Bi-Directional
* ASME B40.100 Grade B
The Mid-West Advantage:
- 5 Year Warranty
- 30 + Years Hazardous Location product manufacturer.
- OEM capability
- Fast on-time Deliveries
- Friendly Customer Support
- Certified Quality System
Model 120 BulletinInstallation & Operation:
Operating & Installation Instructions | Electric Operating & Installation Instructions | Installation Recommendations | Typical Manifold Installation
Model 130 – Explosion Proof
Functions and Applications
The Model 130 diaphragm isolated Differential Pressure Switch is CSA Certified to both the Canadian and U.S. Standards and U.L. Listed to the U.S. Standards. The entire assembly is Certified for use in Class I, Division 1, Groups C, D; Class II, Division 1, Groups E, F, & G Hazardous locations. The entire gauge and the switch is enclosed in a rugged flameproof enclosure. The use of reed switch technology eliminates the need for an additional explosion-proof seal fitting within 18″ of the enclosure.
Certifications:
- CSA Certified, UL Listed, Class I, Division 1, Groups C, D;
- Class II, Division 1, Groups E,F, & G.
Switch Options:
- Set Point Accuracy: 2%*
- Interface: 1/2” Conduit Entry with Color Coded 24”, 18 Awg. Flying Leads
- Enclosure: NEMA 7 (Flame-proof), NEMA 4X optional (In addition to NEMA 7)
- Switch Adjust: External Access to switch adjust internal to enclosure
- Input Power: None. (Switches do not need input power to operate)
Body:
- Working Pressure: 500 PSIG (34.5 bar)
- Differential Over-range: 500 PSID (34.5 bar)
- Range: 0-5” H2O to 0 – 400” H2O
- High Side to Low side Isolation: Yes (Diaphragm Style)
- Process Connections: 1/4” MNPT Bottom
- Materials: AL, 316 / 316L SS, Brass, Hastelloy
Indicator:
- Accuracy: 2%*
- Dial Size: None (Switch Only), 3 1/2”, or 4 1/2”
- Readings: Uni-directional
The Mid-West Advantage:
- 5 Year Warranty
- 30 + Years Hazardous Location product manufacturer.
- OEM capability
- Fast on-time Deliveries
- Friendly Customer Support
- Certified Quality System
Model 130 BulletinInstallation & Operation:
Operating & Installation Instructions | Electric Operating & Installation Instructions | Installation Recommendations | Typical Manifold Installation
Model 140 – Explosion Proof
Common Applications
- Filter/Strainer Monitoring
- Compressed Air, Hydraulic, Refrigerant
- Pump Performance Testing
- Heat Exchanger Pressure Drop Monitoring
- Water Treatment Applications
- Tank Level Monitoring
- Horizontal or Vertical
Product Features
- DP Ranges from 0-25 PSID to 0-100 PSID
- Elastomer Diaphragm Sensing Element, No Cross Port Leakage
- Up to 3000 PSIG Working Pressure (200 bar)
- Over-Range Protection, High over Low and Low over High
- Gauge Bodies Available in Aluminum, Brass, Stainless Steel
- Wide Range of Elastomers
Certifications:
- CSA Certified, UL Listed, Class I, Division 1, Groups C, D;
- Class II, Division 1, Groups E,F, & G.
Switch Options:
- Set Point Accuracy: 2%
- Interface: 1/2” Conduit Entry with Color Coded 24”, 18 Awg. Flying Leads
- Enclosure: Aluminum NEMA 7 (Flame-proof), NEMA 4X optional (In addition to NEMA 7)
- Switch Adjust: External Access to switch adjust internal to enclosure
- Input Power: None. (Switches do not need input power to operate)
Body:
- Working Pressure: 3000 P.S.I.G. (200 bar)
- Differential Over-range: 3000 PSID (200 bar)
- Range: 0-25 PSID to 0- 100 PSID (0 – 1.7 bar to 0 – 7 bar)
- High Side to Low side Isolation: Isolated (Diaphragm Style)
- Process Connections: 1/4” MNPT Bottom
- Materials: AL, 316 / 316L SS, Brass
Indicator:
- Accuracy: 2%
- Dial Size: None (Switch Only), 2 1/2” (Standard), 3 1/2”, or 4 1/2”
- Readings: Uni-directional
The Mid-West Advantage:
- 5 Year Warranty
- 30 + Years Hazardous Location product manufacturer.
- OEM capability
- Fast on-time Deliveries
- Friendly Customer Support
- Certified Quality System
Model 140 Bulletin | Over Range Protection
Installation & Operation:
Operating & Installation Instructions | Electric Operating & Installation Instructions | Installation Recommendations | Typical Manifold Installation
Model 220 – Explosion Proof
The Model 220 carries global certifications from CSA, UL, and ATEX. The piston style Differential Pressure Switch is CSA Certified to both the Canadian and U.S. Standards and U.L. Listed to the U.S. Standards. Certified to ATEX directive Ex d, IIB + H2 with an IP65 rating.
Mid-West Instrument’s new Hazardous Locations “Delta P” switches are provided with a field wire-able terminal strip. The terminal strip eliminates the need to add a costly explosion-proof junction box near the switch. Multiple outputs are available ranging from low power reed switches to higher load switching relay outputs.
Features and Benefits
A competitively priced Indicating Differential Pressure Switch for use in measuring the pressure drop across filters, strainers, separators, valves, and pumps in Hazardous Locations.
- Simple, Rugged, Compact Design
- Working Pressure 3000 PSIG (200 bar)
- Over-range Protection to Maximum Pressure
- Captive Cover Screws
- The Entire Assembly is Certified for Hazardous Locations
Certifications:
- CSA Certified, UL Listed, Class I, Division 1, Groups B, C, D;
- Class II, Division 1, Groups E,F, & G.
- ATEX Certified, Ex d IIB + H2 II 2GD IP65
Switch Options:
- Set Point Accuracy: 2%*
- Interface: 1/2” Conduit / Cable Entry with 16 Position Terminal Strip
- Enclosure: NEMA 7 / Ex “d” (Flame-proof), IP65 Weatherproof rating
- Switch Adjust: Internal to the Enclosure
- Input Power: None. (For Reed switch Outputs) ; Required for Relay Output
Body:
- Working Pressure: 4000 PSIG (Division Classification) / 3000 PSIG (ATEX)
- Differential Over-range: Same as Working Pressure
- Range: 0-5 PSID (0-0.35 bar) to 0 -100 PSID (0-7 bar)
- Process Connections: 1/4” FNPT End Connected (Standard)
- Materials: 316 / 316L Stainless Steel
Indicator:
- Accuracy: 2%*
- Dial Size: 4 1/2” Standard None (Switch Only)
The Mid-West Advantage:
- 5 Year Warranty
- 30 + Years Hazardous Location product manufacturer.
- OEM capability
- Fast on-time Deliveries
- Friendly Customer Support
- Certified Quality System
Model 220 Bulletin
Installation & Operation:
Division 1 Electrical Operating & Installation Instructions | ATEX Electrical Operating & Installation Instructions | Installation Recommendations | Typical Manifold Installation
Model 240 – Explosion Proof
The Model 240 carries global certifications from CSA, UL, and ATEX. The diaphragm isolated Differential Pressure Switch is CSA Certified to both the Canadian and U.S. Standards and U.L. Listed to the U.S. Standards. In addition, it is certified to the ATEX directive Ex d, IIB + H2 with an IP 65 rating.
Mid-West Instrument’s new Hazardous Locations “Delta P” switches are provided with a field wireable terminal strip. The terminal strip eliminates the need to add a costly explosion-proof junction box near the switch. Multiple outputs are available ranging from low power reed switches to higher load switching relay outputs.
Features and Benefits
A competitively priced Indicating Differential Pressure Switch for use in measuring the pressure drop across filters, strainers, separators, valves, and pumps in Hazardous Locations.
- Total Separation of High and Low Pressures Sides
- Simple, Rugged, Compact Design
- Working Pressure 1500 PSIG (103 bar)
- Over-range Protection to Maximum Presssure
- Captive Cover Screws
- The Entire Assembly is Certified for Hazardous Locations
Certifications:
- CSA Certified, UL Listed, Class I, Division 1, Groups B, C, D;
- Class II, Division 1, Groups E,F, & G.
- ATEX Certified, Ex d IIB + H2 Ex II 2GD IP65
Switch Options:
- Set Point Accuracy: 2%*
- Interface: 1/2” Conduit / Cable Entry with 16 Position Terminal Strip
- Enclosure: NEMA 7 / Ex “d” (Flame-proof), IP65 Weatherproof rating
- Switch Adjust: Internal to the Enclosure
- Input Power: None. (For Reed switch Outputs) ; Required for Relay Output
Body:
- Working Pressure: 1500 PSIG (100 bar)
- Differential Over-range: Same as Working Pressure
- Range: 0-20″ H2O (0-50 mbar) to 0-100 PSID (0-7 bar)
- High Side to Low side Isolation: Isolated (Diaphragm Style)
- Process Connections: 1/4” FNPT End Connected (Standard)
- Materials: AL, 316 / 316L SS,
Indicator:
- Accuracy: 2%*
- Dial Size: 4 1/2” Standard None (Switch Only)
The Mid-West Advantage:
- 5 Year Warranty
- 30 + Years Hazardous Location product manufacturer.
- OEM capability
- Fast on-time Deliveries
- Friendly Customer Support
- Certified Quality System
Model 240 Bulletin
Installation & Operation:
ATEX Electrical Operating & Installation Instructions | Division 1 Electrical Operating & Installation Instructions | Transmitter Electric Operating & Installation Instructions | Installation Recommendations | Typical Manifold Installation
Model 120 – Division 2
Functions and Applications
The Division 2 rated product is a lower cost alternative when compared to the Explosion-Proof designs that are often used in Division 2 applications. Mid-West Instrument’s Model 120 is CSA Certified to both the Canadian and U.S. standards and U.L. Listed to the U.S. Standards. In addition the Model 120 indicating differential pressure switch is CE marked to the Low Voltage Directive.
Mid-West Instrument’s “Delta P” switches utilize reed switch technology. Reed switches can provide switching control from low power loads (PLC’s) to small inductive loads such as relays & small solenoids. With proper switch protection, over 1,000,000 cycles can be realized.
Specifications:
- Certifications: CSA Certified, UL Listed, Class I, Division 2, Groups A, B, C, D;
- Class II, Division 2, Groups F & G.
Switch Options:
- Set Point Accuracy: 2%*
- Interface: 1/2″ Conduit Entry with Color Coded  24″, 18 Awg. Flying Leads
- Enclosure: NEMA 4X / Type 4 switch enclosure classification.
- Switch Adjust: External Access
- Input Power: None. (Switches do not need input power to operate)
Body:
- Working Pressure: 5000 PSIG (345 bar)
- Differential Over-range: 5000 PSID (345 bar)
- Range: 0-5 PSID (0-0.35 bar) to 0-100 PSID (0-7 bar)
- Process Connections: 1/4” FNPT Back (Standard)
- Materials: AL, 316 / 316L SS, Brass
Indicator:
- Accuracy: 2%*
- Dial Size:Â None (Switch Only), 2 1/2″ (Standard), 3 1/2″, or 4 1/2″
- Scales: Uni-directional , Bi-Directional
The Mid-West Advantage:
- 5 Year Warranty
- 30 + Years Hazardous Location product manufacturer.
- OEM capability
- Fast on-time Deliveries
- Friendly Customer Support
- Certified Quality System
Model 120 Bulletin
Installation & Operation:
Operating & Installation Instructions | Electrical Operating & Installation Instructions | Installation Recommendations | Typical Manifold Installation
Model 140/142 – Division 2
Functions and Applications:
The Division 2 rated product is a lower cost alternative when compared to the Explosion-Proof designs that are often used in Division 2 applications. Mid-West Instrument’s Models 140/142 are CSA Certified to both the Canadian and U.S. standards and U.L. Listed to the U.S. Standards. In addition the Model 140 indicating differential pressure switch is CE marked to the Low Voltage Directive.
Mid-West Instrument’s “Delta P” switches utilize reed switch technology. Reed switches can provide switching control from low power loads (PLC’s) to small inductive loads such as relays & small solenoids. With proper switch protection, over 1,000,000 cycles can be realized.
Product Features
- DP Ranges from 0-20″ WC to 0-100 PSID
- Elastomer Diaphragm Sensing Element, No Cross Port Leakage
- Up to 3000 PSIG Working Pressure (200 bar)
- Over-Range Protection, High over Low and Low over High
- Gauge Housings Evailable in Aluminum, Brass, Stainless Steel and Acetal Plastic
- Wide Range of Elastomers
Certifications:
- CSA Certified, UL Listed, Class I, Division 2, Groups A, B, C, D;
- Class II, Division 2, Groups F & G.
Switch Options:
- Set Point Accuracy: 2%
- Interface: 1/2” Conduit Entry with 7 Position Terminal Strip
- Enclosure: NEMA 4X / Type 4 switch enclosure classification.
- Switch Adjust: External Access
- Input Power: None. (Switches do not need input power to operate)
Body:
- Working Pressure: 140 – 3000 P.S.I.G. (200 bar); 142 – 1500 (100 bar)
- Differential Over-range: 140 – 3000 PSID (200 bar); 142 – 1500 PSID (100 bar)
- Range: 0-20″ H2O to 0 -100 PSID (0-50 mbar to 0-7 bar)
- High Side to Low side Isolation: Isolated (Diaphragm Style)
- Process Connections: 1/4” FNPT Back (Standard)
- Materials: AL, 316 / 316L SS, Brass
Indicator:
- Accuracy: 2%
- Dial Size: None (Switch Only), 2 1/2” (Standard), 3 1/2”, or 4 1/2”
- Readings: Uni-directional , Bi-Directional
The Mid-West Advantage:
- 5 Year Warranty
- 30 + Years Hazardous Location product manufacturer.
- OEM capability
- Fast on-time Deliveries
- Friendly Customer Support
- Certified Quality System
Model 140 Bulletin | Model 142 Bulletin
Installation & Operation:
Model 140 Operating & Installation Instructions | Model 140 Electric Operating & Installation Instructions | Model 142 Operating & Installation Instructions | Model 142 Electric Operating & Installation Instructions | Installation Recommendations | Typical Manifold Installation
Model 220 – Division 2
Functions and Applications
The Model 220 classified for Division 2 locations provides another alternative to the installer that does not like additional junction boxes which are required for flying lead interfaces.
The piston style Model 220 configured for the Division 2 classification is CSA Certified to both the Canadian and U.S. Standards and U.L. Listed to the U.S. Standards. It also has a NEMA 4X (Type 4) weatherproof classification.
Mid-West Instrument’s new Hazardous Locations “Delta P” switches are provided with a field wireable terminal strip. Just loosen the “captive” screws & remove the cover to access the terminal strip. The terminal strip eliminates the need to add an additional junction box near the switch. Multiple hermetically sealed reed switch outputs are available.
Certifications:
- CSA certified, UL Listed , Class I, Division 2, Groups A,B,C, & D;
- Class II Division 2, Groups F & G.
Switch Options:
- Set Point Accuracy: 2%*
- Interface: 1/2” Conduit / Cable Entry with 16 Position Terminal Strip
- Enclosure: NEMA 4X Rating
- Switch Adjust: Internal to the Enclosure
- Input Power: None.
Body:
- Working Pressure: 4000 PSIG
- Differential Over-range: Same as Working Pressure
- Range: 0-5 PSID to 0 -100 PSID
- Process Connections: 1/4” FNPT End Connected (Standard)
- Wetted Materials: 316 / 316L Stainless Steel,
Indicator:
- Accuracy: 2%*
- Dial Size: 4 1/2”, None (Switch Only)
- Readings: Uni-directional
The Mid-West Advantage:
- 5 Year Warranty
- 30 + Years Hazardous Location product manufacturer.
- OEM capability
- Fast on-time Deliveries
- Friendly Customer Support
- Certified Quality System
Model 220 – Division 2 Bulletin
Installation & Operation:
Electrical Operating & Installation Instructions | Installation Recommendations | Typical Manifold Installation
- Competitively Priced
- Local Indication with a Traditional Gauge Face
- 4-20 Milliamp Output Loop Powered
- Remote ZeroField Wireable
- Out of box operation (no programming required)
- Max 1000 ohm Loop Resistance
- Calibrated and Tested Prior to Shipment
Model 121 – Piston Type
Common Applications
- Filter/Strainer Monitoring
- Compressed Air
- Hydraulic
- Refrigerant
- Pump Performance Testing
- Heat Exchanger Pressure Drop Monitoring
Transmitter Specifications
- 4-20mA Loop Powered Micro Processor based Transmitter
- Internal Push Button Zero (available for non-hazardous locations only)
- 4 Position Terminal Strip
- 8-28 VDC Loop Powered 2-wire interface
- 1000 Ohm max loop resistance at 28 Vdc.
- ±2% Accuracy from 20% to 100% of scale, ascending
- Operating Range -20ºF to 150ºF (-20ºC to 65ºC)
- Indicator operation is isolated from Loop Power
- Weather Resistant
- Assembly is housed in a NEMA 4X (IP65) Enclosure
- Engineered plastic enclosure with 1/2″ NPT access
The Mid-West Advantage:
- 1 Year Transmitter Warranty
- 5 Year Gauge Warranty
- 30 + Years Hazardous Location product manufacturer.
- OEM capability
- Fast on-time Deliveries
- Friendly Customer Support
- 3rd Party Certified Quality System
Installation & Operation: Electrical Operating & Installation Instructions | Installation Recommendations | Typical Manifold Installation
Model 124 – Piston Type
Common Applications
- Sub Sea / Deep Well
- High Pressure Filter/Strainer Monitoring
- Compressed Air
- Hydraulic
- Refrigerant
- Pump Performance Testing
- Heat Exchanger Pressure Drop Monitoring
Transmitter Specifications
- 4-20mA Loop Powered Micro Processor based Transmitter
- Internal Push Button Zero (available for non-hazardous locations only)
- 4 Position Terminal Strip
- 8-28 VDC Loop Powered 2-wire interface
- 1000 Ohm max loop resistance at 28 Vdc.
- ±2% Accuracy from 20% to 100% of scale, ascending
- Operating Range -20ºF to 150ºF (-20ºC to 65ºC)
- Indicator operation is isolated from Loop Power
- Weather Resistant
- Assembly is housed in a NEMA 4X (IP65) Enclosure
- Engineered plastic enclosure with 1/2″ NPT access
The Mid-West Advantage:
- 5 Year Warranty
- 30 + Years Hazardous Location product manufacturer.
- OEM capability
- Fast on-time Deliveries
- Friendly Customer Support
- 3rd Party Certified Quality System
Model 140 – Diaphragm Type
The Model 140 Transmitter offers highly visible local display along with the independent 4-20mA output. This allows for precise monitoring at the unit or at the control panel. This unit works well in tank level applications and in fluids with high solids content.
Common Applications
- Tank Level Monitoring Horizontal or Vertical
- Flow Indication/Balancing
- Filter Monitoring for Gases
- Water Treatment Applications
- Vacuum Application
Transmitter Specifications:
- 4-20mA Loop Powered Micro Processor based Transmitter
- Internal Push Button Zero (available for non-hazardous locations only)
- 4 Position Terminal Strip
- 8-28 VDC Loop Powered 2-wire interface
- 1000 Ohm max loop resistance at 28 Vdc.
- ±2% Accuracy from 20% to 100% of scale, ascending
- Operating Range -20ºF to 150ºF (-20ºC to 65ºC)
- Indicator operation is isolated from Loop Power
- Assembly is housed in a NEMA 4X (IP65) aluminum enclosure with 1/2″ NPT access
The Mid-West Advantage:
- 1 Year Transmitter Warranty
- 5 Year Gauge Warranty
- 30 + Years Hazardous Location product manufacturer.
- OEM capability
- Fast on-time Deliveries
- Friendly Customer Support
- 3rd Party Certified Quality System
Installation & Operation: Operating & Installation Instructions | Installation Recommendations | Typical Manifold Installation
Special Note About Chemical Seals: Chemical Seals Document
Model 142 – Diaphragm Type
The Model 142 Transmitter offers highly visible local display along with the independent 4-20mA output. This allows for precise monitoring at the unit or at the control panel. This unit works well in tank level applications and in fluids with high solids content.
Common Applications
- Tank Level Monitoring Horizontal or Vertical
- Flow Indication/Balancing
- Filter Monitoring for Gases
- Water Treatment Applications
- Vacuum Application
Transmitter Specifications:
- 4-20mA Loop Powered Micro Processor based Transmitter
- Internal Push Button Zero (available for non-hazardous locations only)
- 4 Position Terminal Strip
- 8-28 VDC Loop Powered 2-wire interface
- 1000 Ohm max loop resistance at 28 Vdc.
- ±2% Accuracy from 20% to 100% of scale, ascending
- Operating Range -20ºF to 150ºF (-20ºC to 65º C)
- Indicator operation is isolated from Loop Power
- Assembly is housed in a NEMA 4X (IP65) aluminum enclosure with 1/2″ NPT access
The Mid-West Advantage:
- 1 Year Transmitter Warranty
- 5 Year Gauge Warranty
- 30 + Years Hazardous Location product manufacturer.
- OEM capability
- Fast on-time Deliveries
- Friendly Customer Support
- 3rd Party Certified Quality System
Installation & Operation: Operating & Installation Instructions | Electric Operating & Installation Instructions | Installation Recommendations | Typical Manifold Installation
Notice About Chemical Seals: Chemical Seals Document
Model 700, 710, 715 – Diaphragm Type
Mid-West Instrument Model 700 Wet/Wet Differential Pressure Transmitter utilizes a piezoresistive differential pressure sensor sensing element with stainless steel isolated diaphragm. Silicon oil is filled in between die and two diaphragms. The measured differential pressure is transmitted onto the die through the diaphragm and silicon oil. The signal output generated by the piezoresistive bridge sensor is amplified into a useable voltage or 4-20 mA output as specified by customer. 1 Year Limited Warranty
Common Applications Monitor Differential Pressure Across:
- Filters
- Local Flow Indication
- Factory Pneumatic Air
- Heat Exchangers
- Strainers, Pumps
- Pitot Tubes
- Level Applications
Product Features
- Available Ranges: 0-5 PSID (0.35 bar) to 0-300 PSID (0-20.0 bar)
- Use with Liquid or Gas media compatible with material of construction
- Full stainless steel construction, compact size, easy installation
- Laser welded, fully-sealed construction: NEMA 4X (IP65)
- Utilizes Piezoresistive Differential Pressure Sensor Isolated Diaphragm
- Zero Adjust / Potentiometer ±5%
- Span Adjustable / Potentiometer ±5%
- CE Certified to EMI / EMC Directive
- LCD or LED display available upon request
- (Available with DIN Connector & 4-20mA Output only, 2-Wire 20-28 VDC)
- Maximum Overpressure:
- (+) Hi-Side equals 2 times specified DP range
- Maximum Overpressure:
- (-) Low-Side is equal to specified DP range
- Maximum Static Pressure 2,900 PSI
- Operating temperature limits – 14° F to 175° F.
- Storage temperature is -40° F to 200° F
- Sensor is temperature compensated from 32° F to 122° F
- Model 700 is Manufactured in China
It is recommended to install a 3 valve manifold between point of measurement and the transmitter.
Materials Construction
- Pressure Port & Housing: 321 Stainless Steel
- Diaphragm: 316L Stainless Steel
- O-Ring: Viton
- Standard Process Connections: ¼ ” Female BSPP
- (¼” BSPP x ¼” FNPT & ¼” BSPP x ½” FNPT S.S. Adapters Available)
- Fill liquid: Silicon Oil
Available Electrical Specifications:
- Power Supply: 2-Wire 15~28 VDC
- 3-Wire 15~28 VDC
- Output Signals: 2-Wire 4~20mADC,
- 3-Wire, 0~5VDC, 1~5VDC, 0~5VDC
- 0~10VDC, 0-10mADC and 0-20m ADC
- Electrical Connections: Din Plug 43650 or 1.5m 4-pin cable
- Response Time: (10%~90%) <=1ms
- Insulation Resistance 100MΩ, 50VDC
- CE Marked in Accordance With EMC Directive
Model 220 – Piston Type, Hazardous
The Model 220 provides a simple low cost loop powered 8-28 Vdc two wire 4-20mA Transmitter with highly visible local display allowing for monitoring at the unit and in the control room. The transmitter utilizes the same CSA, UL and ATEX rated sensor and explosion proof housing as on the Models 220 and 240 explosion proof switches. Classification for Division 2 locations provides another alternative to the installer that does not like additional junction boxes which are required for flying lead interfaces.
Common Applications
- Measuring or Controlling the pressure drop across:
- Filters
- Strainers
- Separators
- Valves
- Pumps
Transmitter Specifications:
- 4-20mA Loop Powered Micro Processor based Transmitter
- 4 Position Terminal Strip
- 8-28 VDC Loop Powered 2-wire interface
- 1000 Ohm max loop resistance at 28 Vdc.
- ±2% Accuracy from 20% to 100% of scale, ascending
- Operating Range -20ºF to 150ºF (-20ºC to 65ºC)
- Indicator operation is isolated from Loop Power
- Assembly is housed in aluminum enclosure with 1/2″ NPT access
- DIV II = NEMA 4X (IP65)
The Mid-West Advantage:
- 1 Year Transmitter Warranty
- 5 Year Gauge Warranty
- 30 + Years Hazardous Location product manufacturer.
- OEM capability
- Fast on-time Deliveries
- Friendly Customer Support
- 3rd Party Certified Quality System
Installation & Operation: Electrical Operating & Installation Instructions | Installation Recommendations | Typical Manifold Installation
Model 240 – Diaphragm Type, Hazardous
The Model 240 provides a simple low cost loop powered 8-28 Vdc two wire 4-20mA Transmitter with highly visible local display allowing for monitoring at the unit and in the control room. The transmitter utilizes the same CSA, UL and ATEX rated sensor and explosion proof housing as on the Models 220 and 240 explosion proof switches. Classification for Division 2 locations provides another alternative to the installer that does not like additional junction boxes which are required for flying lead interfaces.
Common Applications:
- Measuring or Controlling the pressure drop across:
- Filters
- Strainers
- Separators
- Valves
- Pumps
Transmitter Specifications:
- 4-20mA Loop Powered Micro Processor based Transmitter
- 4 Position Terminal Strip
- 8-28 VDC Loop Powered 2-wire interface
- 1000 Ohm max loop resistance at 28 Vdc.
- ±2% Accuracy from 20% to 100% of scale, ascending
- Operating Range -20ºF to 150ºF (-20ºC to 65ºC)
- Indicator operation is isolated from Loop Power
- Assembly is housed in aluminum enclosure with 1/2″ NPT access
- DIV II = NEMA 4X (IP65)
The Mid-West Advantage:
- 1 Year Transmitter Warranty
- 5 Year Gauge Warranty
- 30 + Years Hazardous Location product manufacturer.
- OEM capability
- Fast on-time Deliveries
- Friendly Customer Support
- 3rd Party Certified Quality System
Competitively priced, compact wet/wet differential pressure transmitter. For use on liquid or gas media compatible with material of construction.
Mid-West Instrument Model 700 Wet/Wet Differential Pressure Transmitter utilizes a piezoresistive differential pressure sensor sensing element with stainless steel isolated diaphragm. Silicon oil is filled in between die and two diaphragms. The measured differential pressure is transmitted onto the die through the diaphragm and silicon oil. The signal output generated by the piezoresistive bridge sensor is amplified into a useable voltage or 4-20 mA output as specified by customer. 1 Year Limited Warranty
Common Applications Monitor Differential Pressure Across:
- Filters
- Local Flow Indication
- Factory Pneumatic Air
- Heat Exchangers
- Strainers, Pumps
- Pitot Tubes
- Level Applications
Product Features
- Available Ranges: 0-5 PSID (0.35 bar) to 0-300 PSID (0-20.0 bar)
- Use with Liquid or Gas media compatible with material of construction
- Full stainless steel construction, compact size, easy installation
- Laser welded, fully-sealed construction: NEMA 4X (IP65)
- Utilizes Piezoresistive Differential Pressure Sensor Isolated Diaphragm
- Zero Adjust / Potentiometer ±5%
- Span Adjustable / Potentiometer ±5%
- CE Certified to EMI / EMC Directive
- LCD or LED display available upon request
- (Available with DIN Connector & 4-20mA Output only, 2-Wire 20-28 VDC)
- Maximum Overpressure:
- (+) Hi-Side equals 2 times specified DP range
- Maximum Overpressure:
- (-) Low-Side is equal to specified DP range
- Maximum Static Pressure 2,900 PSI
- Operating temperature limits – 14° F to 175° F.
- Storage temperature is -40° F to 200° F
- Sensor is temperature compensated from 32° F to 122° F
- Model 700 is Manufactured in China
It is recommended to install a 3 valve manifold between point of measurement and the transmitter.
Materials Construction
- Pressure Port & Housing: 321 Stainless Steel
- Diaphragm: 316L Stainless Steel
- O-Ring: Viton
- Standard Process Connections: ¼ ” Female BSPP
- (¼” BSPP x ¼” FNPT & ¼” BSPP x ½” FNPT S.S. Adapters Available)
- Fill liquid: Silicon Oil
Available Electrical Specifications:
- Power Supply: 2-Wire 15~28 VDC
- 3-Wire 15~28 VDC
- Output Signals: 2-Wire 4~20mADC,
- 3-Wire, 0~5VDC, 1~5VDC, 0~5VDC
- 0~10VDC, 0-10mADC and 0-20m ADC
- Electrical Connections: Din Plug 43650 or 1.5m 4-pin cable
- Response Time: (10%~90%) <=1ms
- Insulation Resistance 100MΩ, 50VDC
- CE Marked in Accordance With EMC Directive
Model 126
The Model 126 Series differential pressure indicator is a piston-type ∆P gauge. It is low cost and reliable for measuring pressure drop across filters, stainers and separators. In addition, switch options are available.
Common Applications
- Filter Monitoring
- Strainer Monitoring
- Water System Applications
- Refrigerant Filtration Systems
Specifications:
- Differential Pressure Range 0-5 PSID (0-0.35 bar) to 0-20 PSID (0-1.4 bar)
- Accuracy ±5% F.S.
- Dial Size
- Single 1-1/4″ x 2-1/4″ Oval (Std.)
- Dual 1-1/4″ x 2-1/4″ Oval (Opt.)
- Working Pressure 3,000 PSIG (200 bar)
- Operating Temp. -40º F To +200º F (-40ºC to 93ºC)
- Body Material – Aluminum (Std.), 316/316L SS (Opt.)
- Internal Materials – 316 Stainless Steel
- Elastomers – Buna-N (Std), Viton®* , Neoprene, Ethylene-Propylene,
- Switch Option
- SPDT 3W, 125 VAC/VDC, 0.25 Amp
- SPST 60W, 240 VAC/VDC, 3 Amp
- Switch Mounting Clamp On, Stick On Flat Pack
- Process Connections 1/8″ FNPT Bottom (Std)
- 1/8″ FNPT End Conn. (Opt.)
- Dimensions 1.25H” x 1.62W” x 2.48L”
- Weight 0.5#
Viton® is a Registered Trademark of DuPont Dow Elastomers
The Mid-West Advantage:
- 5 Year Warranty
- 30 + Years Hazardous Location product manufacturer.
- OEM capability
- Fast on-time Deliveries
- Friendly Customer Support
- Certified Quality System
Model 127
The Model 127 Series differential pressure indicator is a piston-type ∆P gauge. It is low cost and reliable for measuring pressure drop across filters, stainers and separators. In addition, switch options are available.
Common Applications
- Filter Monitoring
- Strainer Monitoring
- Water System Applications
- Refrigerant Filtration Systems
Specifications:
- Differential Pressure Range 0-25 PSID (0-1.7 bar) to 0-100 PSID (0-7 bar)
- Accuracy ±5% F.S.
- Dial Size
- Single 1-1/4″ x 2-1/4″ Oval (Std.)
- Dual 1-1/4″ x 2-1/4″ Oval (Opt.)
- Working Pressure 3,000 PSIG (200 bar)
- Operating Temp. -40° F To +200° F (-40°C to +93°C)
- Body Material – Aluminum (Std), 316/316L SS Opt.
- Internal Materials – 316 Stainless Steel
- Elastomers Buna-N (Std), Viton®* , Neoprene, Ethylene-Propylene
- Switch Option
- SPDT 3W, 125 VAC/VDC, 0.25 Amp
- SPST 60W, 240 VAC/VDC, 3 Amp
- Switch Mounting Clamp On, Stick On Flat Pack
- Process Connections 1/8″ FNPT Bottom (Std), 1/8″ FNPT End Conn. (Opt.)
- Dimensions 1.25H” x 1.62W” x 2.78L”
- Weight 0.6#
The Mid-West Advantage:
- 5 Year Warranty
- 30 + Years Hazardous Location product manufacturer.
- OEM capability
- Fast on-time Deliveries
- Friendly Customer Support
- Certified Quality System
Model 146
The Model 146 Series differential pressure indicator is a diaphragm-type ∆P gauge that has total separation between the high and low sides. In addition, switch options are available.
Common Applications
- Filter Monitoring
- Strainer Monitoring
- Water System Applications
- Refrigerant Filtration Systems
Specifications:
- Differential Pressure Range 0-50″ H2O (0-125 mbar) to 0-30 PSID (0-2.0 bar)
- Accuracy ±5% F.S.
- Dial Size
- Single 1-1/4″ x 2-1/4″ Oval (Std.)
- Dual 1-1/4″ x 2-1/4″ Oval (Opt.)
- Working Pressure 1,000 PSIG (70 bar)
- Operating Temp. -40º F To +200º F (-40ºC to +93ºC)
- Body Material – Aluminum, Brass, 316/316L
- Internal Materials – 316 Stainless Steel
- Elastomers Buna-N (Std), Viton®* , Neoprene, Ethylene-Propylene, Silicone
- Switch Option
- SPDT 3W, 125 VAC/VDC, 0.25 Amp
- SPST 60W, 240 VAC/VDC, 3 Amp
- Switch Mounting Pre-set in Tube, Flat Pack, Din Connector
- Process Connections
- 1/8″ FNPT Back Conn. (Opt.)
- 1/8″ FNPT Bottom Conn. (Std.)
- Dimensions 1.7H” x 2.5W” x 2.9L”
- Weight 2.5#
Viton® is a Registered Trademark of DuPont Dow Elastomers
The Mid-West Advantage:
- 5 Year Warranty
- 30 + Years Hazardous Location product manufacturer.
- OEM capability
- Fast on-time Deliveries
- Friendly Customer Support
- Certified Quality System
Model 444
The Model 444 Series Differential Pressure Indicator offers a simple, yet functional design for use with filters, strainers, etc. This low cost indicator makes the perfect alternative to more costly differential pressure gauges where readability, small size and price are important considerations.
Specifications:
- Differential Pressure Range 0-5 PSID (0-0.35 bar) to 0-25 PSID (0-1.7 bar)
- Accuracy ±5% F.S.
- Indication-Green / Red Sliding Indication with Nylon Lens
- Working Pressure 300 PSIG (20 bar)
- Max.Operating Temp. +200º F (93ºC)
- Body Material – Glass Filled Nylon (GFN)
- Internal Materials – GFN & Stainless Steel
- Elastomers Buna-N, Viton®
- Direct Mounting SLOTTED HEX BOLT 3/8″-24 UNF/1.75″ SPACING
- Dimensions 1.15H” x 1″W” x 2.88L”
Viton® is a Registered Trademark of DuPont Dow Elastomers
The Mid-West Advantage:
- 5 Year Warranty
- 30 + Years Hazardous Location product manufacturer.
- OEM capability
- Fast on-time Deliveries
- Friendly Customer Support
- Certified Quality System
Model 522 – Filter Minded
The Model 522 Series Differential Pressure Indicating Switch is a compact,
weather resistant device for challenging DP Applications and installations.
It is suitable for use in outdoor and “Hose Down” applications. The Rolling
Diaphragm Sensing Element isolates the high and low sides (Reverse Pressure
must be avoided).
The Model 522 Series Differential Pressure Indicator has a rubber rolling diaphragm and a metal body. In addition, switching options are available.
- Range: 0-5 PSID thru 0-50 PSID
(0.35 bar thru 3.4 bar) - Max. Static Pressure 1000 PSIG
(69 bar). - Max. Differential Pressure: 200 PSID
(13.8 bar)
Gauge Features:
- Range: 0-5 PSID (0-0.35 bar) thru 0-50 PSID (0-3.5 bar)
- Max. Static pressure 1000 PSIG (70 bar).
- Max. Over Range Differential Pressure: 200 PSID (14 bar) -High over low
- Aluminum or 316/316L SS Gauge Body.
- Wetted 316 SS, Ceramic, & Acetal moving components.
- Available with Buna or Viton Elastomers.
- Process Connections (End Connected) 1/8″ or 1/4″ FNPT
- Weather-resistant construction standard.
- Dial Accuracy ± 5% F.S. standard.
- 0.8” weatherproof multicolored Dial
- 2-1/2” optional dial.
- Five Year Limited Warranty.
- Switch options
- SPST 60W, 240 VAC/VDC, 3 amp
Viton® is a Registered Trademark of DuPont Dow Elastomers
The Mid-West Advantage:
- 5 Year Warranty
- 30 + Years Hazardous Location product manufacturer.
- OEM capability
- Fast on-time Deliveries
- Friendly Customer Support
- Certified Quality System
Model 555
The Model 555 Series Differential Pressure Gauge offers a two-sided dial, an optional switch output, and an optional switch output with LED, for use with filters, strainers, etc. While this low cost gauge is a “step up” from the Model 444, it still provides another alternative to the more costly differential pressure gauges with equivalent functionality.
It offers a two sided a two-sided dial providing easier installation regardless of flow direction. It is used on filters & strainers. The Rolling Diaphragm Sensing Element isolates the high and low side of the indicator assuring filter efficiency (Reverse pressure must be avoided).
Specifications:
- Differential Pressure Range 0-5 PSID (0-0.35 bar) to 0-50 PSID (0-3.5 bar)
- Accuracy ±5% F.S.
- Dual Color Coded Dials (custom scales available)
- Working Pressure 300 PSIG (20 bar)
- Max. Operating Temp. +200º F (93ºC)
- Body Material – Glass Filled Nylon (GFN)
- Internal Materials – GFN, Ceramic, & Stainless Steel
- Elastomers Buna-N (std.), Viton®* (opt.)
- Direct Mounting SLOTTED INTERNAL HEX HEAD BOLT 3/8″-24 UNF 1.75″ SPACING
- 1/4″ FNPT Adapter (opt.)
- Other Connection Options Available
- Dimensions 2.27H” x 1.5W” x 2.88L”
Viton® is a Registered Trademark of DuPont Dow Elastomers
The Mid-West Advantage:
- 5 Year Warranty
- 30 + Years Hazardous Location product manufacturer.
- OEM capability
- Fast on-time Deliveries
- Friendly Customer Support
- Certified Quality System
Model 555 Indicator Bulletin | Model 555 Indicator Bulletin – With Aluminum Base | Installation & Operation Bulletin
